Due to the extreme weather conditions in the summer, the temperature is too high, too dry or too much rain, too humid. Therefore, it has not always been considered a good season for home improvement. In fact, as long as you pay attention to some important matters in summer construction, you can avoid quality problems. Here, Jiuzheng Building Materials Co., Ltd. specially collected decoration information suitable for summer construction for you, hoping to help you to install a satisfactory home in this summer!
The bathroom is the main part of the decoration. Ceramic sanitary ware is the most important product of the bathroom. The purchase and matching are especially important.
Selection of ceramic sanitary ware varieties
The main types of ceramic sanitary wares include toilets, bidets, face washers, washing tanks, mopping pools, hand cartons, soap boxes, etc. Currently, there are many brands of ceramic sanitary ware on the market, and the quality grades are quite different, and the price difference is very different. When purchasing, you should first have a sense of support, first determine the standard you want to achieve, each component or accessory in the kit should be at the same level.
Determine the drainage method and installation size of the toilet
Before purchasing the toilet, you must first measure the distance from the center of the drain to the wall (lower drainage method) or the distance from the ground (post-drainage method) to determine whether the selected toilet is a lower drain or a rear drain structure. The toilet can be installed in the same way and with the right size. The wall distance of the toilet drain should be equal to or slightly smaller than the wall distance of the toilet drain (lower drainage mode); the distance of the toilet drain from the ground should be equal to or slightly higher than the height of the bathroom drain (post-drainage).
Matching product style tones must match
There are more than one ceramic parts in the bathroom. The number of ceramic products such as toilet bowls, wash basins, soap boxes, hand cartons, mop pools, etc. can only be harmonious or beautiful.
Carefully select the visible surface
When selecting ceramic sanitary ware, there should be different requirements for the visible surface and the non-visible surface. The visible surface refers to the surface that people can easily see after the porcelain is installed. The quality of the visible surface should be strictly controlled, especially when the water is splashed during use. The quality of the part is more important, and the quality of the surface that is not visible after installation is not too picky.
Appearance quality three judgment
(1) Is there any crack: use a thin rod to tap the edge of the porcelain to hear if the sound is crisp. When there is a 'husky' sound, the porcelain is cracked.
(2) Deformation size: Place the porcelain pieces on a flat platform, check whether the movement is stable and symmetrical in all directions, whether the mounting surface and the edge of the porcelain surface are flat, and whether the mounting holes are even and smooth.
(3) Glazed surface quality: the glazed surface must be smooth and smooth, and the glaze color is uniform. Visible surface, especially the glaze quality of water splashing is especially important. Drip a few drops of colored liquid on the glaze with a cloth. After a few seconds, dry it with a damp cloth, check the glaze, and it is better to have no dirty spots.
Porcelain parts also have water absorption rate, toilets also have performance requirements such as sewage, water consumption, noise, water seal function, etc. These performance consumers are generally difficult to check and judge, should try to buy products with quality credit guarantee, check the product A recent effective quality inspection report with the CMA chapter certified by the relevant national authorities.
Ferroalloys, generalized ferroalloys, are products that are added to molten iron as a deoxidizer, elemental additive, etc. in steelmaking to provide a characteristic or meet certain requirements. An intermediate alloy of iron and one or more elements, mainly used in steel smelting. In the steel industry, all intermediate alloys for steel making, whether iron or not (such as silicon calcium alloy), are generally referred to as "iron alloys". It is customary to include certain pure metal additives and oxide additives.
Ferro Alloys,Ferro Silicon,Silicon-Barium Alloy,Spheroidizing Agent
Ningxia Evergreen Trading Co., Ltd. , https://www.nxevergreen.com