Gas liquefied petroleum gas from high pressure into low pressure work is completed by the pressure reducing valve, in addition to decompression, but also has the function of stabilizing the outlet gas pressure, should pay attention to the use: 1, reducing valve and hose interface to Close connection, preferably tied with wire or clamp with tube clamp. 2, on the pressure reducing valve, you must first check the pressure reducing valve inlet seal is deformed off. 3, pressure reducer and angle valve is connected with the anti-buckle. When using the pressure reducer, hold the valve body with one hand and align the handwheel with the outlet thread of the angle valve. Use the other hand to rotate the handwheel counterclockwise until the pressure reducing valve does not swing left and right. 4, when changing the bottle to remove the pressure reducer, cylinder angle valve must be closed before unloading. 5, after the relief valve is removed, should be gently on the hob or other dry items, do not readily fling the floor, so easy to make pressure reducer damage, but also easy to make the inlet seal off 6 When the pressure reducer fails, you should ask the professional and technical personnel to repair. Do not disassemble yourself.
Steel Flange,Incoloy Flange,Inconel Flange
YUHONG GROUP CO.,LIMITED , http://www.alloypipeline.com