Roller-coating is the surface of the aluminum substrate degreasing and chemical treatment, roll coating quality paint, drying and curing. The roller plate material is the same as the film plate. Through the high-performance roll coating process, the precision and flatness of the plate can be controlled more effectively, and the traditionally caused irregularities and folds are successfully eliminated, so that the architectural decoration color is uniform, delicate, and soft and bright. According to different coatings and roller coating methods, there are also some differences in the quality of roller-coated plates. The film thickness of the roller coating surface is thinner than that of the coating plate, only 0.04mm, so the regular roller coating plate is generally thinner than the same size of the coating plate 0.1mm. However, due to the roll coating process, the color difference is less likely to occur compared to the film coating. Roller coating is soft, easy to clean, and it is not easy to scratch and discolor, but the price is high.
Further reading How to identify roller plates:
1. Burned with a lighter, a pungent plastic taste;
2. After the smoked part is wiped off, the color is still bright;
3. Scrape with the blade on the side of the gusset plate. No plastic layer falls off and flicks with your fingers. The sound is crisp.
1) The main features of roller-coating:
1 good temperature resistance, aluminum melting point of 660 degrees, the general temperature can not reach its melting point.
2 strong environmental protection, not easy to yellow using chromium-free treatment liquid to make up, to make up for the defects of the film is easy to change color; roller paint contains active chemical molecules, to promote the formation of a protective layer on the surface of the material. Active chemical molecules are stable and easy to recycle, meeting environmental requirements.
3 Corrosion resistance Because of its tight oxide film on the surface, it has strong adhesion, oxidation resistance, acid resistance, alkali resistance, corrosion resistance, decay resistance, and resistance to ultraviolet radiation.
4 uniform color, long-lasting, uniform color and delicate. It is soft and beautiful, avoiding the individual chromatic aberration of traditional spray paintings. Regardless of the ceiling area, the color is always the same. Lasting constant new.
5 rigid and tough combination, the board surface strength is extremely high. Tough and flexible, can be freely cut, slit, arc, pressure, drilling, connection and fixed side compression molding.
2) Home decoration common specifications: 300mm × 300mm, 300mm × 600mm and so on.
Further reading How to identify roller plates:
1. Burned with a lighter, a pungent plastic taste;
2. After the smoked part is wiped off, the color is still bright;
3. Scrape with the blade on the side of the gusset plate. No plastic layer falls off and flicks with your fingers. The sound is crisp.
1) The main features of roller-coating:
1 good temperature resistance, aluminum melting point of 660 degrees, the general temperature can not reach its melting point.
2 strong environmental protection, not easy to yellow using chromium-free treatment liquid to make up, to make up for the defects of the film is easy to change color; roller paint contains active chemical molecules, to promote the formation of a protective layer on the surface of the material. Active chemical molecules are stable and easy to recycle, meeting environmental requirements.
3 Corrosion resistance Because of its tight oxide film on the surface, it has strong adhesion, oxidation resistance, acid resistance, alkali resistance, corrosion resistance, decay resistance, and resistance to ultraviolet radiation.
4 uniform color, long-lasting, uniform color and delicate. It is soft and beautiful, avoiding the individual chromatic aberration of traditional spray paintings. Regardless of the ceiling area, the color is always the same. Lasting constant new.
5 rigid and tough combination, the board surface strength is extremely high. Tough and flexible, can be freely cut, slit, arc, pressure, drilling, connection and fixed side compression molding.
2) Home decoration common specifications: 300mm × 300mm, 300mm × 600mm and so on.
Fenghua Jade Motor Co., Ltd. , http://www.ywwjsl.com