Said that the decoration market, the water is too deep, a lot of friends reflect the renovation, until the decoration half he found that building materials to buy expensive, decoration team to find the wrong, the construction progress is too slow. In order to build a warm home for oneself, one can only work as a supervising person, decorate it during the study, and find quality problems in the decoration. However, there are some decoration problems he did not find, that is, decoration workers cut corners caused by cutting corners, unclear television signals and other quality problems to bring a lot of inconvenience to life. The following author will introduce you to some of the problems often encountered in the decoration process, friends plan to advance to prevent it!
Problem 1 wire installation socket fever
When installing electric sockets, switches and lamps, electricians do not wire according to construction requirements. In particular, when consumers use some electric appliances such as water heaters and air conditioners that consume large amounts of electricity, the switches and outlets are heated and even burned, causing great losses to consumers.
Reminder: In the construction supervision of the electrician in strict accordance with the operating procedures for construction, after all switches, sockets installed, be sure to look at whether these parts have a fever.
Problem 2 Paving Problem Tiles Falling
Paving tiles are a highly technical process. If you cut corners, the most likely problems are the emptying of tiles, the use of cement and adhesives for paving tiles. If the mix is ​​unreasonable, there will be problems such as shedding.
Reminder: The “Quality Acceptance Criteria for Family Room Decoration Projects†requires that tile and floor tile should be flat and firm, with clear patterns, no dirt and no traces, and the same surface color, uniform joints, no cracks, missing corners, and missing edges. Empty drums must not exceed 5% of the total.
Problem 3 Wall Slotted Wall Cracking
The buried pipeline must be slotted on the wall and ground in order to bury the pipeline. A few workers perform barbaric construction during the grooving operation, which not only damages the building load-bearing structure, but also may cause damage to other nearby pipelines.
Reminder: Before construction, we must reconfirm the direction and location of the pipeline with the construction team leader. For different wall structures, the requirements for slotting are not the same: the walls of the load-bearing wall in the house are not allowed to be slotted, and the wall with the insulating layer is easy to cause cracking on the surface after being slotted, and on the ground Slotting, but also be careful not to damage the floor, causing trouble to the residents downstairs.
Question 4 Ground Leveling Hazards to Buildings
Some houses are not well-grounded and need to be re-leveled during the renovation. If the workers are not careful or intentionally sloppy, it will cause the problem of “more and more unevennessâ€, and the cement mortar used in construction will also greatly increase the ground load, causing hidden dangers to the safety of the building.
Reminder: Before ground leveling, ground surface treatment must be done first, and then use cement mortar to level the ground. After the cement is dry, determine the flatness of the entire floor using a dedicated level ruler, and then proceed to the next step.
Home Furnishing Trickdy decoration Taste Entrance decoration Paint Lacquer Cement Coating Socket Floor tile Tile Floor tile ld Tile
Pengxin Fiberglass Co., Ltd. , http://www.sdfoldingscreens.com