Welding Helmet Troubleshooting Guide

Shop Now

 

Tips and tricks to help with electronic / auto-darkening welding helmet troubleshooting issues.

While this article is firstly intended to assist owners of Weldclass branded helmets, most of the tips suggested will apply to other brands too.

 

Top Tips

 

Troubleshooting Checklist

Fault

Possible Cause

Applicable Weldclass Promax Helmet / Lens Model

Possible Remedy

Momentary disruption to sensing of the arc
This can occur for a number of reasons, for example a change in the arc or weld position.

Lens is staying dark when no welding arc is present

Sensitivity too high

Reduce sensitivity level setting

Place helmet/lens in direct sunlight (with solar panel facing the sun) for at least 4 hours, longer if possible

 

 

Why is My Welding Helmet Flickering

If your welding helmet is flickering this can be caused by a number of factors, such as low battery power, obstructed sensors, or incorrect settings. Review the checklist above to check potential causes. 

 

 

 

View the Weldclass Helmet Range

           

  

 

 

Clevis Pins

Clevis Pins,Clevis Pins With Head,Clevis Pins Without Head,Stainless Steel Clevis Pin

Kunshan Liyue Hardware Products Co.,Ltd , https://www.fixlyhardware.com