With the fierce competition in the domestic hardware market, the competitors of Chinese hardware companies will not only be peers of domestic independent brands, but also multinational hardware brand giants. But at the same time, we should also see that the localization of international brands still has a long way to go. The Chinese market is huge, and consumer demand will also be different. The difference between China and foreign countries is a problem that must be faced when entering the Chinese market.
As one of the most important bases in China's hardware enterprises, Wenzhou, Wenzhou's bathroom hardware industry is mostly small and medium-sized enterprises, enterprise operators have small investment, and the asset-liability ratio is not high. Therefore, the risk of increasing production costs and declining corporate profits is not high. However, in the face of the current restrictions on the purchase of real estate in the domestic market and other factors, the author believes that SMEs need to do a few good considerations in the hardware domestic market.
Hardware plays an indispensable role in our daily lives. From the perspective of real estate development trends in the future, the national home hardware market is expected to grow by 3% to 5% annually in the next five years. From the perspective of domestic hardware supply, the domestic hardware brands occupy 65% ​​of the mainstream status. In the process of national call for urbanization, the eastern coastal areas are at the forefront, and the central and western regions are the focus of development, and the current housing prices are increasing. There are also affordable housing and new rural construction.
Create products that suit your consumer base
The price of products with different brands, styles and functions of bathroom hardware pendants is quite different. Bathroom accessories are consumables due to frequent use and rapid product updates.
The market space of bathroom hardware accessories is very huge. From the material point of view, the bathroom hardware on the market is mainly made of titanium alloy, pure copper chrome plating, stainless steel chrome plating and space aluminum. Titanium alloy hardware is the most exquisite and durable, but the price is the most expensive, the price is in the hundreds or even thousands of yuan; pure copper chrome-plated products can effectively prevent oxidation, quality is guaranteed, is the mainstream of the current market, the price is about 100 yuan Stainless steel chrome and space aluminum have the lowest price, and are less than one hundred yuan, but the service life is also the shortest. From the color point of view, these new generation of bathroom hardware products are mostly free from the original hard and cold stainless steel color, silver white and brass color occupy the current mainstream.
Do a good job in brand accumulation, rooted in market demand, bathroom hardware accessories companies need to enhance brand awareness, first of all to do a good product quality, long-term wet bathroom, good quality products can be more durable; secondly, good product appearance, whether it is elegant series or personality The series has its own characteristics to be remembered by consumers; once again, it is necessary to accumulate brands for a long time, promote them well, and use advertisements or e-commerce platforms for publicity. One day, it will stand up to the "Chinese waist plate" and become the leading brand in the bathroom hardware industry.
Through our company, intensive cultivation, grasp the consumer psychology and habits of our consumers, do a good job in product styles and services, and channel construction, I believe that market growth is at hand.
Three-dimensional composite drainage network is a new type of geosynthetic material. The structure is a three-dimensional geotechnical core, and both sides are adhered with needle-punched non-woven earthwork fabrics. The three-dimensional geotextile core includes a thick vertical rib and a beveled rib at the top and bottom. The groundwater that can be quickly drained from the road itself has a pore maintenance system that can block capillary water at high loads. At the same time, it can also play a role in isolation and foundation reinforcement, is a new type of geosynthetics. Three-dimensional composite drainage network made by the unique three-dimensional geotextile double-sided adhesive geotextile. Combined with geotextile filter effect and geotextile drainage and protection, to provide a complete "filter - drainage - protection" effect.
It is laid between foundation and base, which is used to discharge water between foundation and base, block capillary water and effectively combine it into the marginal drainage system. This structure automatically shortens the foundation drainage, drainage time significantly shorter, and can make the decrease in the number of the use of the material selection of foundation can be used with more fine material, low permeability of materials. Can extend the life of the road.
In the base layer laying three-dimensional composite drainage network to prevent the base of fine material into the ground floor, that is, play a role in isolation. Aggregate grass will enter the upper part of the geonet in a limited degree. In this way, the composite geotextile network also has a potential to limit the lateral movement of the aggregate base, in this way, its role is similar to the strengthening of the Geogrid. In general, the tensile strength and rigidity of the composite geotechnical drainage network is superior to many geogrids for foundation reinforcement, and this restriction will improve the supporting capacity of the foundation.
Road aging, cracks formed, most of the rain will enter the section. In this case, the three-dimensional composite drainage network directly laying under the road, instead of drainage of the foundation. The three-dimensional composite drainage network can be collected before the water enters the foundation / sub-base. But also in the three-dimensional composite drainage network at the bottom of a layer of film, to further prevent the water into the foundation. Whether it is for rigid roads or flexible road systems, this structure can extend the life of the road.
Three-dimensional composite drainage network is a new type of drainage geotechnical materials. To high-density polyethylene (HDPE) as raw materials, a special extrusion process from the processing, with three special structure. The middle ribs are rigid and longitudinally arranged to form drainage channels, and the upper and lower cross bars form support to prevent the geotextile from being embedded in the drainage channel, and maintain high drainage performance even under very high loads. Sided adhesive seepage geotextile composite use, with "filter - drainage - breathable - protection" comprehensive performance, is the most ideal drainage materials.
product usage
Mainly used for railway, highway, tunnel, municipal engineering, reservoirs, slope protection and other drainage works in a significant effect.
Features
1. Drainage strong (equivalent to one meter thick gravel drainage).
2. High tensile strength.
3. To reduce the probability of geotextile embedded core, to maintain long-term stability of the drainage.
4. Long-term high-pressure load (can withstand about 3000Ka compression load).
5. Corrosion-resistant, acid and alkali, long service life.
6. Construction convenience, shorten the construction period, reduce costs.
Seam and lap of three - dimensional composite drainage network
1, adjust the direction of geosynthetics, so that the length of the material roll perpendicular to the road.
2, composite geotechnical drainage network must be terminated, adjacent geotextile geotextile along the material roll lap.
3, the adjacent geotextile material of the geotextile core with white or yellow plastic buckle or polymer tape connected to connect the material roll. Along the length of the material roll, every 3 feet with a tape connected once.
4, The direction of the geotextile lap to overlap with the direction of packing. If the geotextile material is laid between the foundation / base layer and the base layer, continuous wedge welding, flat welding or stitching shall be carried out so that the upper layer of the overlapped geotextile is fixed. If stitching, it is recommended to use a flat seam method or a general seam method to achieve the minimum requirement for pin length.
HDPE 3D Composite Drainage Geonet,3D Composite Geonet Earthwork,3D Composite Dewatering Network,3D Drainage Board
ZHEJIANG BOYA COMTECH CO.,LTD , http://www.zjbytx.com