The application and development of glazed glass The application and development of glazed glass According to the chronological order, the application development of glazed glass can be divided into four stages:
The first stage
The earliest architectural glazed glass is a chrome-plated glazed glass with a full-color monochromatic coating, followed by a glazed tempered glass with multiple colors of imitation marble or granite. At this time, the curtain wall design is also relatively conservative, and most of them only use a single layer of glazed tempered glass. The reason why the glazed tempered glass is used is because the color consistency of the colored glaze is better than that of the natural stone, and it can be repeated in a large amount without the phenomenon that the specific color stone has obvious color difference in the large engineering project due to the mineral reserve, and the price is relatively low. Light weight, high strength and good safety. This stage is only the initial stage of the glaze.
second stage
The architects realize that the imitation is always lame, and after the creation has vitality, on the basis of understanding the glaze process, the silk-screen glazed tempered glass with simple geometric patterns such as stripes, dots and blocks is gradually introduced. It is mainly used for slabs and pillars to shield the line of sight and improve the appearance of the beautification. At this time, the glazed glass is still dominated by a single layer of tempered glass. This stage has been freed from imitation and entered the early stages of free play. However, because the architect does not fully understand all the processes of glass deep processing, this stage is mostly the application form of glazed tempered glass products, and there are not many products for further composite processing.
The third phase
On the basis of the second stage, the product form of the glazed glass is expanded to the form of composite glass such as glaze coating and glaze hollow. In fact, it has expanded the product range of glazed glass. On the basis of using decorative functions, it has also begun to pay attention to the energy-saving and shading function of glazed glass.
Fourth stage
The comprehensive composite stage of color glaze appears in the growing popularity of Low-E insulating glass, because people pay more attention to the overall effect of the glass curtain wall. The structural members of the building, such as beams and columns, need to be covered, at least partially hidden, beautify the appearance, and highlight the overall design effect. At this time, the use of glazed glass requires the combination of the outdoor color of the Low-E insulating glass at the window and the specific values ​​of visible light transmission and reflection. After calculation, the coverage of the glazed glass, the size of the dots, the color, etc., can be determined and adjusted appropriately. A suitable glazed glass is obtained. In addition, for the exterior glass of the building, the pattern and color of the glazed glass are appropriately designed. In a considerable number of cases, the effect of the frosted glass or even the colored glass can be replaced by the colored glaze. Faced with the reality that coloring float glass is not much color, glazed glass can give designers more inspiration and support.
The glazed surface of the glazed glass is usually not located on the outdoor surface, preferably in the sealed cavity of the insulating glass or the interior of the laminated glass. This pair of colored glaze is also a kind of protection.
Refractory Mortar,Refractory Mortar Cement,Castable Refractory Cement
Filter Media,Activated Carbon Co., Ltd. , http://www.shactivatedcarbon.com