绯 Peony four season management skills :
In the spring, when the temperature in the spring is stable at 10 °C, the basin is changed, and the basin is changed once a year. Take care when handling the basin to prevent the ball from knocking off the rootstock. After removing the pot, the dead roots and roots were removed, and the plants were planted for 3 to 5 days, and then planted in the semi-shade. Do not water, do not spray 2~3 times a day or put it in a place with high humidity. After half a month, you can water a small amount. After one month, the new root will gradually increase the water supply.
After the spring is changed, the pot is moved to a place where the light is sufficient. If the light is insufficient, the lower part of the sphere will turn green. Peony peony is getting redder under direct sunlight. When the outdoor temperature is stable above 15 °C, the peony can be placed on an outdoor balcony with light but not rain. Spring is the season of its growth, should pay attention to the supply of water, but should not be too wet, the soil is dry and then poured. Weather with more rain should reduce the number of watering.
(2) Summer management When the summer temperature is hot, it should be placed in a place with morning and evening light to maintain sufficient water supply, but the water should be wet between the water, while paying attention to spraying several times a day and strengthening ventilation to cool down. After the temperature is cool at the end of summer, it should be moved to a place with sufficient light.
(3) Autumn management In the autumn, the peony should be placed in a place with sufficient light and no rain. The water should be poured into the soil.
After the weather is getting cold, the amount of water can be gradually reduced, so that the potting soil is dried until it is dormant. When the outdoor temperature drops to 10 °C, it should be promptly moved into a closed balcony or room for illumination.
(4) Winter management 绯 Peony is not cold-resistant, indoor temperature should be kept above 8 °C in winter, preferably around 0 °C. The potted plants should be placed on a window sill or balcony with sufficient sunlight to control the water, so that the basin soil is dry. The lower the temperature, the more dry the potting soil should be.
Introduction to the main points of peony conservation:
The peony is warm and dry and light-filled. If the basin is too wet, the light is too weak, and the temperature is too high, which is unfavorable for its growth. The potting soil should be made of humus soil and sandy loam soil, and then mixed with some coarse sand, lime soil and broken bricks to make it grow well.
Peony peony ball is usually grown at a suitable temperature of 24-26 °C. In winter, it is generally necessary to enter the room for the winter. As long as the indoor temperature can be maintained at 5-6 °C, it can be safely wintered. When the indoor temperature is close to 0 °C, it is necessary to pay attention to the cold. In addition to controlling the watering, the daytime must be placed in the sunny window, and the night should be kept warm. Do not water too much during the growth period, but long-term water shortage or insufficient water supply also affects its growth. Under normal circumstances, spraying water every two days can make the sphere redder and more vivid.
In the hot summer weather, pay attention to shade, so as not to burn the sphere in the sun. At the same time, in the summer, even rainy days should pay attention to prevent heavy rain. Fertilizer should contain more phosphorus and potassium fertilizer, and apply fertilizer every 7-10 days. Before and after leaving the room, it is necessary to change the soil and change the pot once a day. Add appropriate amount of cultivated soil foundation fertilizer, avoid using sticky, stagnant, and thin soil, otherwise it will easily cause root tissue necrosis. After 3-4 years of peony potting, the growth trend is declining, and the ball should be renewed.
Cold Forming Elbow Machine is mainly produce Carbon Steel Tee , stainless steel tee and ally steel tee. Tee cold forming machine belongs to cold process ( hydraulic propulsion ) which can produce size from 1/2 inch -24 inch and thickness upto 25mm. The max system pressure : 31.5 Mpa and the steady working pressure is 25 Mpa.
Adavantage of Hydraulic Tee Cold Forming Machine :
1. The one set mould can produce different thickness tee .
2. Power consumption is low .
3. Machine work occupation is small
4. It can produce both Seamless Tee and ERW tee
Butt Welding Tee Machine photo :
Cold Forming Tee Machine
Cold Forming Tee Machine,Hydraulic Tee Cold Forming Machine,Welded Tee Cold Making Machine,Seamless Tee Machine
Dongguang Huawei Hydraulic Pipe Fitting Machinery Co., Ltd , http://www.pipefittingmachine.com