ã€China Aluminum Network】6061T6 aluminum plate, as a heat treatable aluminum plate, strong plasticity. It plays an important role in mold making, aluminum bodywork and so on. And there is a growing trend. Therefore, exploring the performance of the 6061T6 aluminum sheet is necessary for the aluminum industry, and it can also provide a deep understanding of the connotation of the country's “lightweight†development policy.
First, look at the national standard elements of 6061T6 aluminum panels produced by Mingtai Aluminum: SI0.4-0.8, FE0.7, CU0.15-0.4, MN0.15, MG0.8-1.2CR0.04-0.35, ZN0.25 TI0.15.AL is the margin. From the perspective of its composition, MG and SI elements account for a relatively large proportion, so the composition of 6061T6 aluminum plate has a good anti-rust effect and a strong hardness. Although the MG content is not as high as that of the 5083 aluminum plate, the 6061 is a heat-treatable aluminum plate that has undergone rapid quenching at a high temperature to be processed into a T4 or T6 state. Hardness will rise sharply. In mold cutting, numerical control panels and other practical applications will have a relatively high strength.
Secondly, Mingtai Aluminum's 6061T6 aluminum sheet also has higher tensile strength in terms of performance, greater than or equal to 290. The elongation after fracture shows an increasing trend with increasing thickness. The yield strength is not less than 240 and the HV hardness is above 95 degrees.
6061T6 aluminum plate as a quenched aluminum plate, has its specific process. Such as rolling, quenching, sawing, aging and so on. The purpose of the process is to improve the performance and strength of the aluminum plate, according to the different requirements of customers, processing into different specifications used in different places. Facts have proved that 6061T6 aluminum sheet has played a huge practical value in the traditional mold manufacturing, anti-rust oxidation and so on. With the development of science and technology, 6061T6 aluminum plate will play a greater role in new areas.
Steel poles are commonly used to carry several types of electric power lines, distribution lines and lighting system. Distribution lines carry power from local substations to customers. They generally carry voltages from 4.6 to 33kV for distances up to 30 miles, and include transformers to step the voltage down from the primary voltage to the lower secondary voltage used by the customer. A service drop carries this lower voltage to the customer's premises.
Traffic Pole,Galvanized Steel Traffic Pole,High Quality Traffic Pole,Traffic light Pole
Yixing Steel Pole International Trading Co., Ltd , https://www.yx-steelpole.com