The quality of the balcony doors and windows brings great help to people's lives. It can play a role in preventing rain, wind, dust and so on. Therefore, great attention must be paid to the acceptance of balconies and windows, and some decoration workers use aluminum tubes in order to cut corners. Instead of ordinary aluminum alloy door and window materials, the strength of balcony doors and windows is greatly reduced. Therefore, the next small series for everyone to introduce the balcony doors and windows acceptance and balcony doors and windows decoration considerations.
Balcony doors and windows acceptance
1, in the design of the balcony doors and windows must be reasonable, not to save materials, use the top of the balcony of the large window fan, be sure to install 430 mm to 530 mm above the fixed window again below 1100 mm, 1200 mm sliding window installation, and push and pull The window cannot be too wide.
2. The stress of the frame of the balcony doors and windows cannot be too large. Generally, the closed balcony doors and windows do not use the zinc steel balcony guardrail, and the open window uses the zinc steel balcony railing.
3, the sliding path of the balcony doors and windows to be indoors, to prevent the leakage of rain outside, closed balcony doors and windows space to use cement mortar filling.
4. The window and frame of the balcony doors and windows should be fixed firmly. After fixing, nails should be nailed with concrete nails and then reinforced with paint angle steel. Can not be fixed in the brick wall, and more can not use wood and nails to the rod fixed frame, rather than wedge-shaped.
5. The aluminum hardness of the balustrades and windows of the balcony doors and windows must meet the standards, and it is best not to use materials that are more flexible.
Balcony doors and windows decoration considerations
1. The decoration of balcony doors and windows is the key to the decision to safely survive the typhoon, so the quality and sealing of the doors and windows should be very good, and the outward direction of the waterproof box should not be mistaken.
2. The components of the balcony doors and windows must meet the quality standards. The parts of the balcony doors and windows should be made of stainless steel or galvanized parts. If the plastic doors and windows must be nailed, it is necessary to drill holes first, and it is forbidden to directly hammer the nails.
3, the installation of balcony doors and windows must be strong, the appearance can not have the phenomenon of deformation, fracture. The gap outside the slot is sealed tightly, the surface is smooth, no cracks, anti-corrosion treatment must comply with the relevant requirements.
4. If a closed balcony is to be fitted with aluminum alloy or plastic steel windows along the mouth, the iron railings of the window balconies cannot be too dense. At the time of delivery, some special parts have been installed by the builder.
Editor's summary: On the acceptance of balcony windows and doors and balcony doors and windows decoration attention to introduce here, and hope to be helpful to everyone. If you want to know more about yourself, you can follow the information on this site.
Balcony doors and windows
Shower Tray
Bath Tray,Shower Trays,Bathroom Shower Tray,Acrylic Shower Base
Ningbo Waltmal Sanitary Wares Co., Ltd. ,