1. Every time before starting, routinely check the surrounding environment, fastening bolts, oil leakage, and the integrity of the cable. It should create conditions for normal operation.
2. Every time you start, you should start with jog and gradually turn into normal. After running for 10 minutes, check the vibration, noise, and temperature rise of each running part.
3. If the electric drum is leaking oil, pay attention to check the two parts: First, the oil seal, whether it is worn or deformed, the wear can tighten the spring ring of the oil seal lip part, and the oil seal of the wear quantity book is large. Can solve the leak. If it is invalid or deformed, the skeleton oil seal should be replaced in time; secondly, the outlet passage cannot be blocked, and the deposited dust, oil and debris should be removed as soon as possible to ensure the smooth passage.
4. The replacement of the cooling oil, the first oil change time is 10 days, the second time is 1 month, and the oil is changed every three months thereafter. For parts filled with grease, such as motor bearings for the outer packaging drum and the output shaft support of the cycloidal drum, always pay attention to the filling. Generally, it is added once a month, and the new oil is refilled every six months.
5. The backstop used for the high-speed shaft of the outer drum is generally cooled and lubricated by the cooling oil inside the cylinder through the built-in passage to the backstop. To prevent the shortage of oil supply, add the top of the backstop. When the pressure-filling oil cup is installed, when the temperature rises quickly, the oil should be replenished from the oil cup for replenishment. The number of oil injections should not be too much. It should be three to four times a month, and each time the oil filling book exceeds 150. Gram. The backstop should be able to act as a backstop, otherwise the backstop will be damaged.
6, the drum if there is no special circumstances, generally do not need maintenance, but should be carried out for normal maintenance. It can be cleaned once every six months. It is not necessary to remove the gears inside the cleaning cylinder, (cycloid or planetary gear) and the supporting and running parts, and replace the cooling lubricant. Maintenance once a year, disassemble the support, end cover, cylinder, cleaning the inner wall of the cylinder and the transmission body, check the wear of the gears, cycloidal wheel and bearing. Check the force part, whether the key or keyway is deformed, whether the oil seal is worn or not. Great maintenance every two years, disassemble all parts, inspect, repair or replace. All oils used in oil-immersed electric drums should be used strictly in accordance with the specified oil types in the instruction manual. Users should not arbitrarily change the oil types to prevent the motor from burning out.
7. Regularly checking the oil level in the drum is an important part of daily maintenance. The specified oil level is one of the conditions to ensure the normal operation of the drum. The inspection method can be checked according to the method described in the instruction manual. For the adjustment and maintenance of the electric hydraulic block brake and the maintenance of the fluid coupling, please follow the instruction manual of the product.
Concerned about surprises
Label: Daily maintenance and maintenance of electric drum
Previous: Solenoid valve manufacturers six working principles cheats to get the daily dimension Next: Oil temperature machine common fault analysis and elimination
PVC Electrical Tape is made from PVC as the backing material,which are coated with rubber Pressure-sensitive adhesive.
They are resistant to high voltage, fire and weather, commonly designed for connecting separated electrical wires for electrical insulating and protection purposes
1) Made from PVC as backing material
2) Coated with rubber pressure-sensitive adhesive
3) Adhesive: Rubber
4)Thickness: 0.10mm-0.195mm
5)Peeling strength: more than 1.6/1.8 (N/cm)
6)Tensile: more than 16-28N/cm
7)Tensile strength: 160%
8)Voltage broke down: 6.0kv, 8.0kv
Excellent viscosity and flexibility, withstand voltage, burn-resistance, cold-resistance, high-tensile, suitable for insulation wrapping wire, cable and automobile line bunch.
Length and width available according to customers request
Different backing material is available, such as PVC, Kraft, Cloth etc.
Different size and colors is available.
PVC Electrical Tape
Black Electrical Tape,Electrical Tape,Pvc Electrical Insulation Tape ,Pvc Insulation Tape
Jining xunda pipe coating materials co., ltd. , https://www.pipeanticorrosion.com