Hefei wing gates, swing gates, and three-roll gate manufacturers have achieved such good results and are inseparable from the good service attitude of the company itself. Wing gates, swing gates and three-roll gate manufacturers pay great attention to the management of gate quality. They are very concerned about whether the details are handled properly. They often summarize some problems that may arise in various aspects of gates, and cooperate with each other to find out. solution. This time, the gate manufacturers focused on the preparation of the swing gate and wing gate debugging. The preparation of these gates before commissioning has the following points.
1. Check the mains connection according to the wiring diagram of the three-roll gates, wing gates and swing gates.
2. Check the wiring of the gate power supply and other wiring of the entire device. After confirming it is correct, it can be debugged on power-up!
3. The protective ground of the three-roll gate, wing gate and swing gate equipment must be reliably grounded, otherwise it is not allowed to use.
Anhui Linbo Intelligent Technology Engineering Co., Ltd. He Honglin professional installation
Strainer is used for filter the impurities in the pipe to ptotect pump, valve and equipment function well, Ningbo RMI Plastic Co.,Ltd offer PVC Y type stainer and socket end and flange end fit for DIN, ANSI, JIS, BS, NPT standards, size from 1/2" to 4". also supply T type stainer size up to 12" by material CPVC, PVDF, PPH for industrial chemical application.
Ningbo RMI Plastic Co., Ltd. offer Y Strainer with specification:
Size: DN15~DN100 (1/2 inch ~ 4 inch)
Connection: Flange DIN PN10, ANSI CL150, JIS10K, socket DIN, ANSI, JIS, CNS, BS, NPT, BSPT
Body Material: PVC
Screen material: PP, stainless steel
Sealing: EPFM
Strainer
Y Strainer,Plastic Strainer,PVC Strainer,Plastic Filter
Ningbo RMI Plastic Co., Ltd. , https://www.rmiplast.com