Matters needing attention in summer production safety

1. Safety of electricity

The summer weather is hot, people wear thin and sweaty skin, which increases the risk of electric shock. In addition, during this period of humidity and rain, the insulation performance of electrical equipment has decreased. This makes summer a prone season for electrical safety accidents. It is particularly important to grasp electrical safety precautions.

2. Heatstroke and cooling safety

The summer weather is hot and dry, and continuous overload work is likely to cause heat stroke accidents. Only by doing a good job in heatstroke prevention and cooling can the seasonal safety hazards be eliminated. The company's production front-line personnel should be equipped with the necessary heatstroke prevention drugs, and a dedicated person should be responsible for the supply of salty drinks and tea.

3. Safety of the pressure vessel The temperature in summer is relatively high. Place the pressure vessel directly in the open air. The temperature of the high-pressure gas rises under the irradiance of the hot sun and expands in volume. Serious explosion of the gas cylinder may cause casualties and property damage. Once the explosion occurs, it will also bring about two accidents (such as fire), which will increase the loss. It can be seen that the use and storage of pressure vessels in summer operations are very important.

4. Wear personal protective equipment

In order to protect the personal safety of special operators during the construction process, operators must wear personal protective equipment, wear safety helmets, and fasten safety belts when working at height. These things are generally relatively thick. Putting these things on in the hot weather will make people feel hotter, so some workers gave up wearing them during work. Once the danger comes, even the most basic protection is gone, making accidents that were not very harmful become more serious.

5. Equipment and material safety

The detachment and disassembly of large cranes such as tower cranes and lifting machinery, and the scaffolding should be subject to key management. The dismantling personnel strictly abide by the disassembly and assembly plans and technical explanations, and the safety management personnel perform supervision and inspection. Lightning protection and grounding of mechanical equipment in accordance with the specifications in a timely manner; in case of strong winds above level 6, all large machinery and scaffolding should be disassembled and stopped; construction should be done to ensure on-site drainage work to ensure smooth drainage; on-site safety facilities should be strengthened for inspection and protection Work, especially the safety protection devices and facilities, should be regularly checked to make them in good condition to prevent accidents.

Materials and supplies should pay attention to sun protection. The materials in the warehouse should be neatly stacked to ensure good ventilation. Flammable and explosive items should be stored separately.

6. Fire safety

Implement various fire prevention systems, fully equipped fire fighting facilities, strictly control open flame operations, strictly prohibit unauthorized connection of wires, and strengthen storage and use management of flammable and explosive products.

7. Safety of special operation certificate

Strengthen the management of special operations personnel, inspect and hold certificates to prevent the occurrence of illegal operations, and the operation of lifting machinery strictly abides by the "ten no permit" and "ten no hang" regulations. Put the responsibility of production safety into effect and implement it to everyone.

8. Safety against typhoon

The eastern coastal areas are frequented by typhoons, especially in the summer. If not handled properly, not only will there be safety accidents, but also a lot of economic losses. After the strong winds, check them and confirm that they are normal.

9. Fire safety

In summer, the weather is dry, and the hidden fire risk increases immediately. Once it occurs, it spreads quickly.

10. Lightning protection

Thunderstorms are increasing in summer, and tall construction machinery, such as construction elevators and tower cranes, must be properly protected against lightning.

Of course, there are many things to pay attention to during the summer production process, and the above items are just a few of them. The "prevention first, safety first" policy requires us to take safety precautions and try to avoid or reduce the occurrence of dangerous accidents. In the course of our work, as long as we keep the string of safety in mind and earnestly carry out all safety precautions, especially targeted safety protection measures, our safety production work can be prevented.