Digital push-pull gauge operating environment and proper use

Digital push-pull gauge use environment:

The purchased digital force gauge can only be used in a limited area. If it exceeds the scope of use, it will seriously affect the function of the digital force gauge. First, the digital force gauge cannot have water, The use of oil or other liquid splashing environment to avoid instrument failure, vibration or dust, hot air diffuse areas is also not allowed to use digital push pull meter, high humidity and high temperature environment can not be used if the instrument is placed In places with high humidity or cold, the inside of the instrument is prone to condensation, which degrades the function. Xiaobian recommends that you clean and maintain the instrument in the near future. It can effectively maintain the service life of the digital push-pull force meter.

Digital push-pull gauge correct use method:

First, the operator should understand the digital push-pull force meter before using the digital push-pull force meter, and know where it should work in terms of its operation, principle, performance, and operation.

Secondly, operators should always check whether they use it. If not, they should correct it immediately.

Third, the operator should always perform troubleshooting and maintenance on the digital push-pull force meter.

To standardize the method of using a digital push-pull force meter 1. Check whether the battery voltage is normal before use. If the voltage is under voltage, charge it in time. Otherwise, the measurement will show a deviation.

2. Estimate the measurement size, select the appropriate range of digital push-pull force meter, and measure the out-of-range range, which will result in the damage of the digital push-pull sensor.

3. If the measured value is lower than 3% of the digital push-pull measuring range, the accuracy will be deviated.

4. If you do not use it for a long time, you should periodically charge the digital power meter.

5. At the same time, when the weather is humid in the summer, digital display push force gauges should be used to preserve the environment and digital display push force meters should be protected from corrosion.

After the digital push-pull force meter is used, the surface must be wiped clean. Do not place items on the digital push-pull gauge.

Each digital force gauge instrument, its use method and use environment will directly affect the service life of the digital push-pull force gauge, so we must understand the correct use of some digital force gauges and the use of the environment. Reduce the damage/maintenance rate of digital display push-pull gauge products.

If you still want to know more about the digital push-pull gauge data, you can click: http://. . Com/zhyq-ParentList-266713/

Related articles in this article:

Digital display and pointer push-pull force meter which is a good way to find the number of push-pull gauge failure method Digital push-pull gauge death solution digital display push-pull gauge picture

Digital push-pull gauge picture


Nitrile rubber (NBR) o-rings, also known as Buna N, are one of the most commonly used sealing elastomers due to resistance to petroleum-based fuels and lubricants and its relatively low price. Nitrile elastomers are copolymers of acrylonitrile and butadiene. There are a number of common variations of nitrile compounds.

Acrylonitrile Content
The acrylonitrile (ACN) content of the polymer chains can vary from 18% to 50%. Lower ACN content gives better low-temperature properties but inferior resistance to fuels and polar lubricants. Higher ACN content gives lesser quality low-temperature properties but improved fuels and polar lubricants resistance. Standard NBRs typically have 34% ACN content.

Standard Nitrile o-rings are usually sulfur-cured. Sulfur-cured compounds offer better low-temperature properties but are more prone to hardening with high temperatures. Peroxide-cured nitrile o-rings have better heat resistance and lower compression sets but are more expensive and more difficult to process. 

Buna O-rings, Nitrile O-rings, NBR O-rings offer excellent sealing and mechanical properties at low cost. Buna Nitrile O-rings have resistance to common lubricants and are recommended for crude oil, gasoline, propane, petroleum oils and water.  Nitrile Buna O-rings are used in engines, gearboxes, aircraft pumps, and water applications.


Nitrile O Ring

Nitrile Butadiene,Nitrile O Ring,Nitrile O Ring Cord,Nitrile Rubber O Rings

Shenyang Guide Rubber Products Co.,Ltd , https://www.guiderubber.com