In the twinkling of an eye, the heat of March 15 has quietly passed, and the beautiful spring will fade away. The beautiful Hainan Island will also usher in the summer with high sunshine. And May 1 is also the peak season of the home furnishing industry. Various promotional activities will come to you. Will you be able to face the various kinds of tiles in the new home? Let's introduce a few simple tile resolution methods to let you Buy bricks with ease.
1, look
Mainly to see whether there are black spots, bubbles, pinholes, cracks, scratches, stains, missing edges, and angled vitrified tiles on the surface of the tile, please pay attention to whether there are defects such as leakage and leakage. Look at the bottom mark of the embryo. The bottom of the product produced by the regular manufacturer has a clear product mark. If it is not or is particularly blurred, it is recommended to be careful!
2, 掂
It is the weight of the enamel, the feel of the test tile, the same specification product, the good quality, the high-density brick feel is relatively heavy, on the contrary, the quality of the product feels lighter.
3, listen
By tapping on the tiles and by listening to the sound to identify the quality of the tiles, the following two aspects are introduced according to the kitchen wall tiles and vitrified tiles:
Tap method:
1) Wall tiles or small-size tiles are generally separated by one hand and five fingers, holding up the tile, and the other hand tapping the tile face. If the sound is metallic, the quality of the tile is good.
2) The floor tiles (the living room and other floors are made of vitrified tiles or antique bricks), lift the side of the tile with one hand, and tap the middle of the tile with the upper part of the palm of the other hand, if the sound is loud and the echo is long. If the sound of the bronze bell is struck, the ceramic tile has a higher degree of porcelain, high wear resistance, high flexural strength, low water absorption, and is not susceptible to pollution. If the sound is turbid and there is no echo, the degree of porcelain is low (even exists). Crack), the ceramic body of the ceramic is not fully calcined, the wear resistance is poor, the bending strength is low, and the water absorption rate is also high. Such a vitrified brick is highly susceptible to contamination.
4, fight
The product of the same specification and type can be taken out at random for 4 pieces, and the tiles can be laid. Through this step, the three dimensions of the tile size, flatness, and straight angle can be checked.
5, try
Mainly for the anti-slip problem of floor tiles. The material is mainly divided into two kinds of vitrified and glazed. For the anti-slip problem of the current tile, now everyone's common practice is to add water on the brick surface, and then step on it to see if it is slippery. This is actually not It's all right, because some tiles, especially vitrified tiles, will feel more involved when added with water. The principle is similar to adding water between glass. If you want to pry the glass, it is difficult because water The air in the middle is squeezed out, so that the brick and the upper are in closer contact, so it feels more involved, and some vitrified tiles feel slippery when no water is added. For this, it is recommended to add water and not water. Try it as well!
Emergency Light ,Emergency Lamp,Rechargeable Emergency Light,Led Emergency Light
NINGBO JIMING ELECTRIC APPLIANCE CO., LTD. , https://www.jimingemergencylight.com