Load capacity of a spherical bearing with a seat

Source: China Bearing Network Time: 2014-07-28

/*250*250 was created on 2017/12/25*/ var cpro_id = 'u3171089';

The load of the outer spherical ball bearing can be the same as that of the deep groove ball bearing; the equivalent load is calculated in the same way as the deep groove ball bearing.
The axial load can depend on the degree of inner ring and bearing consolidation; usually it should not be greater than 20% of its additional load; when the axial load is large; the consolidation equipment should be added on the Shaft; such as the shoulder.

Recommend to friends comments close window

Bearing related knowledge

Commonly used rolling mill bearing equipment type Daily bearing net bearing spot introduction Bearing residual magnetism how does it happen?
The "correct application method and the cause of the problem" of the rolling bearing

This article links to http://
Please indicate the bearing network http://

Previous:Dimensions of sub-components and parts Next:How to ensure reliable bearing operation

Wave Spring

Wave spring has its unique advantage of saving space, which can replace coil Springs. Wave spring also decreases spring cavity by reducing spring operating height. It saves cost by reducing both component size and material used in production.

Wave spring works as a force loading device. It takes up gap and compensate for dimensional changes within the assembled device. Almost any range of forces can be achieved by gradually or suddenly changing loading force to preset working length. So a precise spring ratio can be realized when loading force and deflection change in proportion.

SEALMANN introduced advanced equipments from overseas used specifically for wave spring making and pre-tempered cold rolling formed flat wire is used to produce wave springs through continuous winding process, which possesses many advantages over products made from die stamping process.

`SEALMANN` wave spring as a force loading component can effectively compensate for dimensional deviations in assembly and it can meet in different static or dynamic applications. There are mainly three types of wave springs, i.e. single-layer wave spring, multi-layer standard wave spring and multi-layer stacked wave spring, and they are widely used in applications such as hydraulic and pneumatic, machinery, gear drive, automobile, aerospace and petrochemicals etc.

Wave Spring,Wave Disc Spring,Wave Spring Washer,Multi-Layer Stacked Wave Springs

Ningbo FLK Technology Co., Ltd. , https://www.flk-global.com