Five solid wood furniture maintenance

How to maintain solid wood furniture is a problem, more and more families began to buy solid wood furniture, but solid wood is also a "squeaky" furniture, wrinkles are not good to see, then how to maintain solid wood furniture, look at the small series to Your solid wood furniture is guaranteed to be five big.

Solid wood furniture is generally poor in heat resistance, so keep it away from heat as much as possible. Under normal circumstances, try to avoid direct sunlight, because strong ultraviolet light will cause the lacquer surface of solid wood furniture to fade; in addition, the heat and luminaires that can emit strong heat will also deform the solid wood furniture, and should be kept away as far as possible; Put the hot water cup, teapot and other things directly on the solid wood furniture, otherwise it will burn the solid wood furniture.

How to maintain solid wood furniture

Although solid wood furniture is durable, its paint surface is easily faded. To this end, furniture must always be waxed. You can gently wipe the surface of the furniture with a damp cloth and some neutral detergent. When you wipe it, follow the texture of the wood. After cleaning, wipe it with a dry cloth or sponge and a professional wood wax. The waxing should take the center as the origin, first and then the middle. However, it is best not to use waxing too often, 1-2 times a year is better.

The 榫卯 structure is important for solid wood furniture. Once loose or falling off, solid wood furniture cannot be used. Therefore, it is necessary to pay attention to check whether the joints are detached, degummed, broken, and loose. If the screws and other parts fall off, you can clean the screw holes first, then fill a hole in the hole, and finally reinstall the screws. If the hoe breaks, it needs to be handled by professional maintenance personnel.

The indoor humidity in winter is higher than that in the outdoor. Therefore, ventilation in the winter window will only make the outside cold air come in and make the room more dry. Therefore, it is recommended that households with more solid wood furniture at home should reduce the time and frequency of window ventilation in winter to maintain proper humidity in the room. Also note that solid wood furniture should be avoided in the vents.

In winter, every family will be warm and cold. In order to keep warm, each family will have their own heaters. Sometimes, in order to get closer to the heat source, the heater is unconsciously pulled to the side of the solid wood furniture. As everyone knows, these furniture are afraid of high temperature, high temperature baking for a long time, it is easy to make the wood lose moisture, local dry cracking, deformation, and the paint film is deteriorated. It is best to place the solid wood furniture at least 1 meter away from the heater.

Metal Sheet Laser Cutting Machine is professional in cutting varies metal sheets. Such as stainless steel, carbon steel, mild steel, iron, galvanized steel, titanium steel, silicon steel, brass, aluminum, titanium alloy, brass, copper, silver, gold, etc.  

Metal Sheet Laser Cutting Machine advantage:  

1. Efficient and stable programming and control system, easy to learn and user-friendly, compatible with a variety of CAD drawing formats, intelligent nesting to save costs, automatic cutting path matching to save processing time;                      2. Metal Sheet Laser Cutting Machine with low energy consumption and low cost of use; high equipment stability, simple and convenient maintenance, and low maintenance cost;

Metal Sheet Laser Cutting Machine

Ss Plate Cutting Machine,Laser Metal Cutting Machine,Laser Cutting Machine,Metal Cutting Machine

Jinan Huaxia Machinery Equipment CO.,Ltd , https://www.cnmetalcutting.com