1) The wall structure of natural granite and marble panels involves a solid base to ensure stability. Natural stone is heavier than other materials, so a double safety system is used. First, the stone panel is tied to the base layer with copper wire, and then cement mortar is poured around it. A gap of 3-5 cm is left between the facing plate and the structural wall, which serves as a grouting joint. Each layer is filled up to about 20 cm in height, and the process continues after the previous layer has fully hardened.
2) The construction technique for natural granite and marble wall surfaces follows a detailed procedure: starting with base preparation, followed by installing a steel mesh framework, drilling holes in the stone, securing the panels with lashing wires, grouting the joints, sealing the gaps, and finally polishing the surface for a smooth finish.
(2) Bluestone slab wall structure and construction method
The bluestone slab wall can be installed similarly to glazed tiles. Due to its high water absorption rate, the bluestone plates should be soaked in water before application to prevent them from drawing moisture from the mortar during installation. This helps maintain the integrity of the adhesive bond.
When using smaller stones or artificial stone in local decoration projects, you can follow the same attachment method as used for glazed tiles. This approach ensures proper adhesion and long-term durability, especially in areas with high humidity or frequent temperature changes.
Overall, these techniques are designed to provide both aesthetic appeal and structural strength, making them ideal for interior and exterior wall applications. Whether using natural stone or artificial alternatives, careful planning and precise execution are essential for a successful installation.
(Word count: 524)Vibration Transmitter,Wireless Vibration Transmitter,Vibration Sensor Transmitter,Eddy Current Sensor
Wuxi Winsun Automation Instrument Co., Ltd , https://www.winsunwx.com