Piston pump is a form of water pump, under the macro-control of the state, China's water conservancy, construction, energy and other industries are steadily developing steadily, and the demand for piston pump is even more so. In the past, Pump related research has also been the support of all walks of life. One of the piston pump structural studies and other related content has gradually started work. Piston pump structure diagram Flange, pump body, pump housing, return plate, swash plate, cover, frame seal, import export, with oil pan, plunger, slipper and other components constitute the plunger pump, which plunger And the plunger sleeve is a pair of precision couplings that can not be interchanged after mating grinding, requiring high precision and smoothness and good wear resistance, the radial clearance of 0.002 to 0.003mm Cylindrical surface of the plunger head cut There is a chute, and through the radial hole, the axial hole connected to the top, the purpose is to change the circulation of fuel supply; plunger sleeve made of oil return hole, are connected to the pump on the body of low pressure oil chamber, the plunger Set into the pump body, the positioning screw positioning. Plunger head chute location, change the amount of fuel supply is also different. Outlet valve and the valve seat is a pair of precision couplings, can not be swapped after grinding, with the gap of 0.01mm. Outlet valve is a one-way valve, under the action of spring pressure, the upper conical surface of the valve is tightly matched with the valve seat. Its function is to cut off the high pressure oil pipe from the upper cavity of the plunger to prevent the oil in the high pressure pipe Inverted into the injection pump. The lower part of the oil valve is cross-section, both to guide, but also through the diesel. Under the conical surface of the valve, there is a small cylindrical surface, called the vacuum ring, whose function is to quickly reduce the pressure of oil in the high-pressure tubing when the fuel supply ends, so as to avoid dripping oil at the orifice. When the ring falls into the valve seat, the upper volume increases rapidly, the pressure decreases rapidly, and the injection is stopped rapidly. Analysis of the structure of the plunger pump plunger pump for the subsequent use and maintenance is very important, if the user in the process of using the plunger pump, do not understand the structure of the device, I believe that when the device problems or other unexpected situations, the user Will be very passive.
Corn Husk is a by-product of corn deep processing enterprises. The corn granules are immersed and then enter the starch production process, and then processed by washing, squeezing, drying and the like. Its main components are fiber, starch, protein and the like. The Corn Skin separated by soaking and crushing corn.
Corn Skin has the protein 10%-12% ,12%-14% protein.
Corn Husk Corn Fiber 10%-12%
Corn Husk Corn Fiber 10%-12%,Corn Bran,Corn Fiber,Corn Skin,Corn Husk
MIDI FEED BIOTECH LIMITED , https://www.midifeed.com