The shower room glass blew frequently to find out the reason to solve the problem

Originally wanted to set up a bathtub here, fatigue bathing solution, but unfortunately the bathroom is too small, and finally can only install a shower room. Saying that this shower room is also good, it can make good use of the bathroom space, and it eliminates the process of releasing water when bathing. However, recently, the news of the shower room glass blew up. Didn't this glass be so good that it would explode? How to prevent self-explosion?

First, find out exactly why shower glass blew 1. Is the quality of the shower room glass not good?

The automatic explosion of tempered glass that occurs without the direct mechanical external force is called self-explosion. Although the self-explosion phenomenon of tempered glass may be caused by improper installation or improper maintenance during use, the more likely cause is the quality of the manufacturer's tempered glass. The tempered glass used in the shower room should be at least 6 in thickness. -8mm.

2, is not the shower glass maintenance is not right?

In the daily use process, the explosion of the glass in the shower room due to the impact of sharp objects, rapid temperature changes, etc. is also common.

Improper installation may also cause the glass to blew. Glass surfaces and edges may cause defects such as scratches, blows, and bursts during processing, transportation, storage, and construction. They may easily cause stress concentration and cause self-explosion of tempered glass. For example, glass may be tilted when installed. Degrees or artificial changes to the shape of the glass can also cause similar problems.

Second, carefully respond to the shower room glass blew way 1, be sure to buy a quality shower room glass

The minimum requirement for tempered glass is to ensure that the product certificate has a 3C certification mark. In addition, when we wear polarized sunglasses to see the glass, the tempered glass should have a colored streak, and it will have a blue spot when viewed with the naked eye; Can pay attention to the curvature of tempered glass, the flatness is not flat as ordinary glass, but there is a sense of roughness, a long side, there will be a certain degree of curvature.

2, be sure to ensure the correct installation of the shower glass

In order to prevent the self-explosion of tempered glass caused by improper installation, it is advisable to ask the manufacturer to provide the door-to-door installation for the professional when purchasing the product, so as to avoid the problem of damage caused by improper installation, and the problem of inseparable responsibility after damage occurs. The most taboo is to cut the glass, because the tempered glass can only be processed to the required shape at the cost of the glass, but can not be processed in the shape after tempering, which is very easy to cause the glass to blew.

3, need to protect the glass around the shower room

The middle part of the tempered glass is the strongest, with the four corners and the edges being the weakest. Once these parts have cracks, they can easily smash the entire glass. I do not know if you observe it, the safety hammer on the window glass of the bus is located on the edge of the glass, which is the use of tempered glass. As for the shower room, we do not want the glass to break. Therefore, in daily life, we must pay attention to the protection of the corners of the glass, and regularly check the corners for cracks.

4, can be shower room glass paste explosion-proof film

Shower room products on the market, due to the consideration of aesthetics and other reasons, generally do not come with glass on the explosion-proof membrane, do it yourself by affixing an explosion-proof membrane can prevent the glass from flying when the child blew, when the choice of explosion-proof membrane through international Window Film Association certified explosion-proof membranes that qualify for the production of safety membranes.

5, daily use to avoid sharp objects contact collision

Tempered glass is very strong and can even withstand the weight of several people, but it has a weakness that is afraid of being scratched and hit by sharp objects. Since the contact area of ​​the sharp object is small, the pressure of the contact point on the glass is quite large, and the glass is exposed to a large external force at this point to cause slight cracking. For the tempered glass, a little cracking means that The stress distribution inside the entire glass was destroyed, resulting in numerous spider web cracks.

Shower room tempered glass

Neodymium Magnet, is the most widely used type of Rare Earth Magnet,also known as the  Permanent Magnet which have strongest magnetism in normal working temperature,is made from an alloy of neodymium,iron, boron to form a steady column structure that has arrayed in same direction. Neodymium magnets are the most commercial permanent magnet and have replaced other permanent magnet in many industrial areas.

The structure of Ndfeb Magnet is very vulnerable when meet oxygen, iron element and separate from Nd2Fe14B and become Fe2O3 that structure is arrayed randomly which will cause the magnetic field become directionless and decline the magnetism. Protective coatings has been added to the neodymium magnet to make it more commercial.Usually,many of the coating are through electrical plating means. coatings like Nickel,Zinc,NiCuNi, Epoxy, Gold, color glaze will be the surface coating treatment.

 Main Manufacturing process of ndfeb magnets

1.Pressing ndfeb garins: pressing process needed to operate in strong magnetic environment.

2.Sintering of ndfeb blocks: sintering process usually in a vacuum furnace at 800~1400 ℃ environment .

3.Wire cut: ndfeb magnet usually are in small and different sizes, cutting process need operated on wire cut machine controlled by automatic system.

4.Grinding of Ndfeb magnet: Operate on artificial diamond polish tool.

 5.Plating of ndfeb: Plating need a lot of poisonous and deadly chemicals ,only expert plating factory could get the business license from China government. Thus we usually send for plating company,

 6.Magnetization of NdFeB,  north pole magnetization facility and south magnetization facility are both needed.(2~30 Koe)

 Application

Neodymium magnet have a widely application area on modern electric and electronic product,computer,earphone,motor,alternator, sensor, MRI... By using the neodymium magnet , product size will smaller and function will better. Neodymium magnet also be called as ndfeb magnet,they could catch iron steel, hence neodymium magnet could be designed as a magnetic catcher for catching things with ferromagnetic surface.

 The curie temperature for the neodymium magnet is from 305~330 ℃.pending on the material grade , working temperature for different neodymium magnets are also different.

Operating the magnet at highest working temperature will decreasing its` magnetism 8~13 % each time of use, thus please carefully with product designs.

The great magnetic force might cause injure to body parts pinched two magnets or with iron steel.Big magnet would broke bones,do not swallow magnets,or using magnet two close to eyes., it will cause injure.The huge magnetic field of neodymium magnet have hazard to electronic product like watch,credit card,floppy disc, medical equipment,phone...

Please keep magnet away from these things.

 

Neodymium Magnet

Neodymium Magnet,Rare Earth Magnet,Ndfeb Magnet,Permanent Magnet,Cylinder Magnet,Block Magnet,Arc Magnet,Customize Magnet

NINGBO SHINE MAGENETIC TECHNOLOGY CO.,LTD , https://www.shinemagnets.com