In the home life, things will inevitably be used for a long time will be aging or damage problems, faucets are our frequent use of sanitary ware, if it is broken, what should we do? Next we will take a look at how to solve the problem if the water tap is broken .
What to do if the faucet is broken. Precautions before repairs : Turn off the water supply and turn off the main water supply valve if necessary.
What to do if the water tap is broken, Problem 1, tap valve seat
If you change the washer and the faucet still drips, there may be a problem with the faucet seat.
Use the correct tool, called the valve seated spanner, and insert the valve seated spanner into the seat, then move it counterclockwise. Once you remove the old seat, make sure you buy the new one. The seat is exactly the same as the original one. In addition, a seat roller or sander is used, which is an inexpensive tool that can flatten the worn valve seat.
What to do if the faucet is broken, Question 2, if it is a press faucet
Required tools: Use these tools to deal with push-type taps - screwdrivers, penetrating oils, slip joints or adjustable wrenches, and pads to be replaced.
Step 1: Turn off the water supply and remove the small screw on or behind the handle of the faucet to remove the handle attached to the faucet body.
Step 2: Remove the handle and check the components of the faucet.
Step 3: Remove the screws that secure the washer.
Step 4: Replace the old gasket with a completely new one.
Step 5: Fix the new gasket to the valve plug and reinstall the components in the faucet.
Step 6: Reinstall the handle and put the button or disc back.
What to do if the faucet is broken, question 3, sealing ring of faucet
If you see water pouring out of the handle, your faucet is leaking. The first thing to do is to first make sure the packing nut is tight, but be careful not to use a pliers or wrench to scratch the nut. Tools required: adjustable wrench, replacement faucet seal, vaseline. If you find that the cause of the leak is not a loose nut, you must replace the seal. The sealing ring of the faucet may be a tight seal consisting of one or more O-shaped rubber rings, or something like a string or a soft wire wrapped around the valve core under a packing nut.
What to do if the faucet is broken, Problem 4, the O-ring of the faucet
Required tools: Adjustable wrench, pipe joint tape, replacement O-shape.
Replace the O-ring:
Step 1: Turn off the water supply, turn it counterclockwise and remove the threaded coupling nut that secures the outlet.
Step 2: After removing the coupling nut, lift the outlet up and out of the outlet seat. You can see the rings in the outlet seat.
The above is the related content of how the faucet is broken. I hope to help you, and more information on the decoration is on this site. Please stay tuned.
More articles:
Ten shower room brand shower room which brand is good
Shenluda faucet please Shenluda faucet Features
What kind of wall outlet faucet products
Moen bathroom official website Moen product is good
Faucet decoration home
Diamond Plate Sheets,Aluminum Plate Lowes,Aluminum Sheet Metal Lowes,Aluminum Plate Home Depot
Jinan Xinhai Aluminum Industry Co., LTD. , https://www.jnxinhai-alu.com