17-7pH Stainless Steel Sheet/Plate/Coil - AMS 5528/Uns S17700

Model NO.: 17-7PH
Stock: Stock
Thickness: 0.3mm to 280mm
Width: 1000mm to 2200mm
Length: Cut as Requirement
Mtc: En 10204/3.1
Surface: 2b, No.1, 1d, 2D, Hl, 8K, Ba, Sb
Edge: Mill Edge or Slit Edge
Trademark: TISCO, LISCO, ZPSS, KRUPP
Transport Package: as Customer′s Requirement
Origin: China
HS Code: 72192300
Model NO.: 17-7PH
Stock: Stock
Thickness: 0.3mm to 280mm
Width: 1000mm to 2200mm
Length: Cut as Requirement
Mtc: En 10204/3.1
Surface: 2b, No.1, 1d, 2D, Hl, 8K, Ba, Sb
Edge: Mill Edge or Slit Edge
Trademark: TISCO, LISCO, ZPSS, KRUPP
Transport Package: as Customer′s Requirement
Origin: China
HS Code: 72192300
1:Brief Introduction Of 17-7PH stainless steel:
Stainless Grade 17-7 PH is a precipitation hardening stainless steel that provides high strength and hardness, excellent fatigue properties, good corrosion resistance, good formability, and minimum distortion upon heat treatment. The alloy provides valuable property combinations particularly well suited for aerospace applications. This special alloy also provides benefits for other applications requiring high strength and good corrosion resistance, as well as excellent properties for flat springs at temperatures up to 600°F (316°C).
Corrosion Resistance:
Corrosion resistance of Type 17-7PH stainless steel in all heat treated conditions, like other types of stainless steels - will develop superficial rust in some environments. For example, in a marine atmosphere, stainless steels show evidence of rusting after relatively short exposure periods. However, after exposure of one or two years, the amount of rust present is little more than that present at six months. As with all martensitic steels, 17-7PH stainless steel may be subject to cracking when exposed under stress in environments containing hydrogen sulfide. Such applications are not recommended.
Formability:
In Condition A, the alloy can be formed comparably to Type 301. It work hardens rapidly and may require intermediate annealing in deep drawing or in forming intricate parts. Springback is similar to that of Type 301. This alloy is extremely hard and strong in Condition C. Therefore, fabrication techniques for such material must be used.
Weldability:
The precipitation hardening class of stainless steel is generally considered to be weldable by the common fusion and resistance techniques. Special consideration is required to achieve optimum mechanical properties by considering the best heat-treated conditions in which to weld and which heat treatments should follow welding. This particular alloy is generally considered to have poorer weldability compared to the most common alloy of this stainless class, 17-4 PH stainless steel. A major difference is the high Al content of this alloy, which degrades penetration and enhances weld slag formation during arc welding. Also, the austenite conditioning and precipitation hardening heat treatments are both required after welding to achieve high strength levels. When a weld filler is needed, 17-7 PH is most often specified.


Other Grades:
201,202,21-4N,301,302,301L,303,303Se,304,304L,304H,304LN,304N,305,S38400,308,309,309S,310,310s,
316,316L,316H,316Ti,316N,316LN,317,317L,317LMN,317LN,321,321H,347,347H,S3100,S31803,S3205,
S32304,S31200,S31260,S32507,405,409,429,430,430F,434,444,403,410S,410,416,420,420F,431F,440A
440B,440C,440F,610,630,631,632,635,660,Alloy 200,Monel 400 ,Alloy K-500 ,Inconel 600 , Incconel 601,
Inconel 625 , Inconel 718 , Alloy 800 ,Alloy 800H,Alloy 800HT,Inconel 825,Alloy 276, Alloy 20, Alloy 59

Chemical Properties:
TYPE Cr Ni Al   C Mn P S Si
17-7PH 16.0-18.0 6.75-7.75 0.75-1.5   0.09 max 1.0 max 0.05 max 0.03 max 1.0 max

2:Stainless Steel Plate Process:
17-7pH Stainless Steel Sheet/Plate/Coil - AMS 5528/Uns S17700


3:Stainless Steel Plate Package:
17-7pH Stainless Steel Sheet/Plate/Coil - AMS 5528/Uns S17700


4:About us:
Tianjin Zhongyantiancheng Steel Co.,Ltd(short for ZYTC ) is a professional manufacturer and exporter of steel products in China, located in Tianjin Beichen District, having the biggest port in North China.
With 20 years of development, the group has become the leader in steel, product variety, complete specifications and so on in North China market, large inventories more than 100,000 tons are maintained all the time.
ZYTC is specialized in steel products, especially Stainless steel pipe,Stainless steel bar,Stainless steel plate (TG,KSK,BG,Krupp), Round bar(SHOUGANG,DAYE), Spiral pipe(LIDA), Aluminum steel plate,Aluminum Pipe ,Copper and so on . 
ZYTC has cooperated with Tianjin Seamless Steel Tube Plant(TPCO), Baotou Steel Pipe Plant, Chengdu Steel Pipe Plant, Anshan Steel Pipe Plant,Baoshan Steel Pipe Plant and other steel pipe plants.Round bar cooperated with Beijing shougang goup,Tonggang steel group, Daye steel bar group ,Benxi bengang group an so on , Baotai titanium group,Baoji Lixing group,Stainless steel plate cooperated with Shanxi TAIGANG Steel Plate grouop,Baogang group,Shanghai Kelubo group ,and Puxiang steel group. all these corporations mentioned above are our shareholder partners. 
ZYTC principle is: supplying the best products and service,being the best supplier.
The company can make steel product according to particular specifications and materials. ZYTC will perfect our quality management system and supply products of high quality to our customers.
We are all looking forward to establishing business relationships with customers all over the world!


5:Why choose us?
★ More than 20 years experience in stainless and aluminum steel fields.
★ Samples available.
★ Specialist metallurgic advice and flexible service.
★ High level of expertise, in-depth product knowledge.
★Competitive price, high quality,rich experiences and high reputation
★Delivered on time.
★ Good after-sale service.
★ Well recognized and trusted by customers.

6: Other productions:
17-7pH Stainless Steel Sheet/Plate/Coil - AMS 5528/Uns S17700
17-7pH Stainless Steel Sheet/Plate/Coil - AMS 5528/Uns S17700
17-7pH Stainless Steel Sheet/Plate/Coil - AMS 5528/Uns S17700
1:Brief Introduction Of 17-7PH stainless steel:
Stainless Grade 17-7 PH is a precipitation hardening stainless steel that provides high strength and hardness, excellent fatigue properties, good corrosion resistance, good formability, and minimum distortion upon heat treatment. The alloy provides valuable property combinations particularly well suited for aerospace applications. This special alloy also provides benefits for other applications requiring high strength and good corrosion resistance, as well as excellent properties for flat springs at temperatures up to 600°F (316°C).
Corrosion Resistance:
Corrosion resistance of Type 17-7PH stainless steel in all heat treated conditions, like other types of stainless steels - will develop superficial rust in some environments. For example, in a marine atmosphere, stainless steels show evidence of rusting after relatively short exposure periods. However, after exposure of one or two years, the amount of rust present is little more than that present at six months. As with all martensitic steels, 17-7PH stainless steel may be subject to cracking when exposed under stress in environments containing hydrogen sulfide. Such applications are not recommended.
Formability:
In Condition A, the alloy can be formed comparably to Type 301. It work hardens rapidly and may require intermediate annealing in deep drawing or in forming intricate parts. Springback is similar to that of Type 301. This alloy is extremely hard and strong in Condition C. Therefore, fabrication techniques for such material must be used.
Weldability:
The precipitation hardening class of stainless steel is generally considered to be weldable by the common fusion and resistance techniques. Special consideration is required to achieve optimum mechanical properties by considering the best heat-treated conditions in which to weld and which heat treatments should follow welding. This particular alloy is generally considered to have poorer weldability compared to the most common alloy of this stainless class, 17-4 PH stainless steel. A major difference is the high Al content of this alloy, which degrades penetration and enhances weld slag formation during arc welding. Also, the austenite conditioning and precipitation hardening heat treatments are both required after welding to achieve high strength levels. When a weld filler is needed, 17-7 PH is most often specified.


Other Grades:
201,202,21-4N,301,302,301L,303,303Se,304,304L,304H,304LN,304N,305,S38400,308,309,309S,310,310s,
316,316L,316H,316Ti,316N,316LN,317,317L,317LMN,317LN,321,321H,347,347H,S3100,S31803,S3205,
S32304,S31200,S31260,S32507,405,409,429,430,430F,434,444,403,410S,410,416,420,420F,431F,440A
440B,440C,440F,610,630,631,632,635,660,Alloy 200,Monel 400 ,Alloy K-500 ,Inconel 600 , Incconel 601,
Inconel 625 , Inconel 718 , Alloy 800 ,Alloy 800H,Alloy 800HT,Inconel 825,Alloy 276, Alloy 20, Alloy 59

Chemical Properties:
TYPE Cr Ni Al   C Mn P S Si
17-7PH 16.0-18.0 6.75-7.75 0.75-1.5   0.09 max 1.0 max 0.05 max 0.03 max 1.0 max

2:Stainless Steel Plate Process:
17-7pH Stainless Steel Sheet/Plate/Coil - AMS 5528/Uns S17700


3:Stainless Steel Plate Package:
17-7pH Stainless Steel Sheet/Plate/Coil - AMS 5528/Uns S17700


4:About us:
Tianjin Zhongyantiancheng Steel Co.,Ltd(short for ZYTC ) is a professional manufacturer and exporter of steel products in China, located in Tianjin Beichen District, having the biggest port in North China.
With 20 years of development, the group has become the leader in steel, product variety, complete specifications and so on in North China market, large inventories more than 100,000 tons are maintained all the time.
ZYTC is specialized in steel products, especially Stainless steel pipe,Stainless steel bar,Stainless steel plate (TG,KSK,BG,Krupp), Round bar(SHOUGANG,DAYE), Spiral pipe(LIDA), Aluminum steel plate,aluminum pipe ,Copper and so on . 
ZYTC has cooperated with Tianjin Seamless Steel Tube Plant(TPCO), Baotou Steel Pipe Plant, Chengdu Steel Pipe Plant, Anshan Steel Pipe Plant,Baoshan Steel Pipe Plant and other steel pipe plants.Round bar cooperated with Beijing shougang goup,Tonggang steel group, Daye steel bar group ,Benxi bengang group an so on , Baotai titanium group,Baoji Lixing group,Stainless steel plate cooperated with Shanxi TAIGANG Steel Plate grouop,Baogang group,Shanghai Kelubo group ,and Puxiang steel group. all these corporations mentioned above are our shareholder partners. 
ZYTC principle is: supplying the best products and service,being the best supplier.
The company can make steel product according to particular specifications and materials. ZYTC will perfect our quality management system and supply products of high quality to our customers.
We are all looking forward to establishing business relationships with customers all over the world!


5:Why choose us?
★ More than 20 years experience in stainless and aluminum steel fields.
★ Samples available.
★ Specialist metallurgic advice and flexible service.
★ High level of expertise, in-depth product knowledge.
★Competitive price, high quality,rich experiences and high reputation
★Delivered on time.
★ Good after-sale service.
★ Well recognized and trusted by customers.

6: Other productions:
17-7pH Stainless Steel Sheet/Plate/Coil - AMS 5528/Uns S17700
17-7pH Stainless Steel Sheet/Plate/Coil - AMS 5528/Uns S17700
17-7pH Stainless Steel Sheet/Plate/Coil - AMS 5528/Uns S17700

Aluminium Profile for Doors

Aluminium Profiles for Sliding Door,Aluminium Sliding Doors,Sliding Doors for Bathrooms

Shandong Huajian Aluminium Group Co., Ltd. , http://www.sdaluminumprofiles.com