Chongqing Iron & Steel announced on the evening of September 29th that the company signed a “**Leasing Contract†with Huarong Financial Leasing Co., Ltd., and agreed to use the 2700mm production line 1# and 2# heating furnaces and furnace-related equipment and other assets to the latter. The rent-to-lease method** was used to cover RMB 310 million to supplement the working capital and the term was three years.
It is understood that the rent for this ** leasing will be based on the lease cost and leasing rate, the total leasing cost will be 310 million yuan, and the monthly interest rate at the time of signing the agreement will be 5.125%. Except for the down payment, the first-phase rental payment date is set on the 10th of the third month after the month of the rental day. Afterwards, the first-phase rent will be paid for each three-month corresponding date. The total amount is 12 issues. The second phase does not require repayment of the principal of the lease, and Phase 3 to Phase 12 pays the principal of the lease of RMB 31 million each time. Chongqing Iron & Steel (Group) Co., Ltd. is the guarantor of this lease.
In addition, during the leasing period, the ownership of the leased property was owned by Huarong Company; upon the expiry of the lease term, Chongqing Iron & Steel paid the purchase price to Huarong Company on time and in full, and then the ownership of the leased property was transferred to the company.
Chongqing Iron and Steel stated that this transaction will enable the company to obtain long-term financial support for its production and operation needs, with no significant impact on actual production and operations.
It is reported that in order to support the funds required for the operation of listed companies, this year, the major shareholder, Chonggang Group, has successively provided financial support for a cumulative amount of 1.3 billion yuan.
Product introduction
HHCMS-220 Carbon Molecular Sieve
The HHCMS-220 is a new nonpolar adsorbent designed to extract nitrogen-rich gas from air. It is suitable for separating nitrogen from air. It has a high adsorption capacity for oxygen and can separate nitrogen from air.
The most notable features of the carbon molecular sieve are high gas-producing efficiency and low energy consumption, especially for the preparation of nitrogen with a purity of less than 99.5% to 99.9%.
Project parameters
Project parameters
The diameter of:1.0-1.3 1.3-1.5
Packing density:≥660kg/m³
The intensity of particle:≥95
Compressive strength abrasion:≤1%
The moisture content:≤0.5%
Standard packing:20Kg/barrel. 40Kg/barrel. 130Kg/barrel
The adsorption time of test condition was 58s with an average pressure of 1-2s
|
Adsorption pressure |
Nitrogen purity (%) |
Yield (Nm3/ h.t.) |
Nitrogen recovery rate |
|
0.8MPa |
99.99 |
80 |
23 |
|
99.9 |
150 |
30 |
|
|
99.5 |
220 |
36 |
|
|
99 |
310 |
42 |
|
|
98 |
370 |
45 |
|
|
97 |
450 |
47 |
|
|
96 |
520 |
50 |
|
|
95 |
580 |
55 |
|
|
0.6MPa |
99.99 |
64 |
24 |
|
99.9 |
110 |
32 |
|
|
99.5 |
180 |
37 |
|
|
99 |
245 |
43 |
|
|
98 |
300 |
46 |
|
|
97 |
360 |
48 |
|
|
96 |
410 |
52 |
|
|
95 |
465 |
56 |
Pay attention to
1. The nitrogen production equipment can reduce the adsorption temperature to better show its excellent nitrogen production performance under conditions;
2. Pay attention to low temperature drying and seal preservation during storage;
Black Strip Molecular Sieve Hhcms-220
Black Strip Molecular Sieve Cms-220,Desiccant Molecular Sieve,Molecular Sieve Bags,Molecular Sieve Continuous Strip Desiccant
Zhejiang Changxing Haihua Chemical Co.,Ltd. , https://www.zjcxhhcms.com