Lights are an indispensable lighting tool in modern life. With the continuous advancement of science and technology, new types of light sources such as fluorescent lamps, energy-saving lamps, and leds are gradually emerging. Many friends are very confused about the concept of led lamps and energy-saving lamps, and believe that led lamps are energy-saving lamps. ,This is not correct. So, energy-saving lamps and led lights which is better it? Here we take a look at the difference between energy-saving lamps and led lights contrast it.
Energy-saving lamps and led lamps which compare the difference between energy-saving lamps and led lamps
Energy-saving lamp and led lamp which is good
First, the difference between the structural principle
What is led light
Led light is a light emitting diode. This type of lamp can convert electricity into light.
What is energy-saving lamp
Energy-saving lamps generally refer to energy-saving light bulbs. The top of the energy-saving lamp is a lamp cap and the lower part is a lamp structure.
Energy-saving lamp and led lamp which is good
Second, the difference in light-emitting principle
The principle of light emission of led lights:
LED lights rely on light-emitting diodes to convert electrical energy into light energy, led is basically a very small led lamp beads are encapsulated in epoxy resin, so it is very small, very light. Led power consumption is very low, in general the operating voltage of the LED is 2-3.6V. The operating current is 0.02-0.03A. This means that it consumes no more than 0.1W of electricity. With the right current and voltage, the life of the LED can reach 100,000 hours.
The energy-saving lamp's luminous principle:
When the lamp filament is heated by the ballast, the filament starts to emit electrons (because some electron powder is applied to the filament) at about 1160k. The electrons collide with the argon atom and generate inelastic collisions. After the argon atom collision, energy is obtained. When it hits the mercury atom, the mercury atom transitions to generate ionization after absorbing energy, emits ultraviolet rays at 253.7 nm, and the ultraviolet light excites the phosphor.
Energy-saving lamp and led lamp which is good
Third, the difference between the advantages and disadvantages
The advantages and disadvantages of led lights:
1. Energy Saving: Energy consumption is 1/4 of energy-saving lamps.
2, longevity: life of up to 50,000 hours or more.
3, solid-state packaging, is a cold light source type.
4, high luminous efficiency, high prices.
5, environmental protection, no mercury harmful substances.
Energy-saving lamp and led lamp which is good
The advantages and disadvantages of energy-saving lamps:
1, small size, compact configuration, high luminous efficiency.
2, start slowly, more power.
3. Mercury contamination during production and after use.
4, glass products, easy to break.
5, easy to damage, short life.
Conclusion: Led lights more advantages than energy-saving lamps, whether in principle or the advantages and disadvantages of the led lights are even better, the cost of led lights with the continuous improvement of led technology, energy-saving lamps will inevitably be replaced by led energy-saving lamps. Above about energy-saving lamps and led lights which is a simple introduction to this, and I hope to help you. For more information, please visit this website. Stay tuned.
Energy-saving lamp led ceiling lamp
Gate Valves are called "full-flow" valves; there's a direct unobstructed path for flow right through the middle of the valve. A wedge-shaped brass gate is lowered into a machined slot to close the valve. They should either be completely open or completely closed. Water flowing through a partially open gate valve wears away the metal and causes the valve to fail over time.
Brass Gate Valve, Flanged Gate Valve, High Pressure Gate Valves, Water Gate Valves
ZHEJIANG KINGSIR VALVE CO., LTD. , https://www.kingsir-valve.com