Antique brick beauty seam construction method antique brick beauty seam construction precautions

After the decoration of the house, everyone will consider to make the home more beautiful, they will choose to make the floor tiles. Because I know the importance of it, and I don’t know how to do it. So everyone knows what is the construction method of antique brick beauty seams? Today, Xiaobian will take a look at the construction methods and construction precautions of antique bricks !


仿古砖美缝


Antique brick beauty seam construction method


1. Ensure that the construction primer must be smooth, strong and dust-free.


2, before the seam construction must ensure that the tile gap is dry.


3, in order to achieve the ultimate effect of the beauty seam, the width of the tile seam should be consistent.


4, the mouth of the discharge nozzle should be small, the discharge should be even.


5. A small amount of self-ejecting material can be wiped off with a newspaper or a waste cloth every time the seam is scraped.


6. When constructing small bricks with many cross interfaces, the material should be discharged as little as possible, and the material should not be seamed. After the horizontal seam is filled, the cross interface should be lightly scraped during the scraping process to prevent excess material from flowing. .


7. After the construction, it is necessary to wait until the surface of the fine agent is solidified, then remove the spilled material.


8. 12 hours after the ground construction, do not walk on the surface before the material is dry, so as not to dirty the ground and contaminate the surface of the beautiful sewing agent, thus affecting the beauty seam effect.


仿古砖美缝


Antique brick beauty seam construction precautions


1. After the tile is pasted, clean the surface of the tile and the gap, dry and free of dust, and then fill it with this product.


2, open the aluminum bottle with a hard object


3. Screw the nozzle to the aluminum bottle mouth.


4. Use the knife to cut the unevenness at the top of the nozzle to a 45 degree angle. The width of the nozzle is slightly smaller than the brick joint. Because the size of the brick is different, the width of the nozzle is determined according to the specific conditions.


5. Pull the bottom ring of the beautiful grout. Put the beautiful grout into the glue gun and use a glue gun to evenly inject the material into the brick joint.


6. Smooth the material with your fingers or a doctor blade.


When we choose the beauty seam construction, everyone needs to learn how to do it. Only in this way can we better construct. The above is the small bricks today introduced for you the antique brick beauty seam construction method and construction considerations to end here, want to know more information, please continue to pay attention to the decoration home.


More related wonderful reading:

Antique brick beauty seam method introduction antique brick beauty seam considerations


Toggles Hooks

Cam Latches,Hardware Latches,Toggles Hooks,Adjustable Toggle Latches

Ningbo Hengchieh Locking Technology Co., Ltd. , https://www.hengchieh.com