As a manufacturer with more than ten years of saw blade production and sales experience, it needs to be determined based on the materials and materials to be cut, size, thickness, shape, cutting method, cutting requirements, etc.
1 The material of the cut aluminum material is not the same as the hardness and hardness of the aluminum material, and the paired alloy saw blade will also be different. If the texture of aluminum is too hard, the head of the alloy saw blade will need to be re-adjusted, because such materials cannot be hard-stiffened, otherwise it is very easy to damage the saw blade; if the aluminum material is soft, the blade of the alloy saw blade can be hardened Some, this can increase the durability of the saw blade.
2 The shape of the material to be cut Generally, the shape of the material to be cut of the enterprise is required to be fixed, and there will be special shapes in a few times. Therefore, slight adjustments must be made based on the data and results of the trial cut.
3 The thickness of the alloy saw blade and the number of teeth The cutting area and thickness of the cut aluminum alloy material determine the thickness of the alloy saw blade and the number of gears. If the material to be cut is relatively thin, then the saw blade must be thin and the number of gears is large, which can greatly reduce the occurrence of material bending and burrs; if the material to be cut is relatively thick, then the saw blade is To be thick and with a small number of gears, this can significantly reduce the yawing, sticking, and tooth decay. Therefore, it is necessary to select the correct blade thickness and number of gears based on the thickness of the material to be cut and the cutting requirements.
4 cutting requirements and cutting methods The entire aluminum alloy cutting industry, most of the material cutting are required and cutting methods.
For example, most aluminum alloy doors and windows require a 45-degree bevel; some people also require cutting without burrs, smooth cutting surfaces, and no chipping. This will need to choose the right alloy saw blade according to the actual situation
5 Aluminum Alloy Saw Blade Size (Diameter) Size Selection The size of the aluminum alloy saw blade needs to be related to the machine equipment used and the thickness of the cutting material. Select the correct diameter blade depending on the size of the machine and material.
Alloy saw blade Foshan Qifeng Saw Co., Ltd.
6 Selection of Internal Control of Alloy Saw Blade The internal control of the saw blade is relatively simple. It is mainly based on the requirements of the equipment. However, in order to ensure the stability of the saw blade in the cutting process, the saw blade with a diameter of 455 mm or more is best. It is better to choose a larger one.
. How to properly select the appropriate alloy circular saw blade as a manufacturer, in the selection of alloy saw blade, one must be based on the material, shape,
Parameters such as size, thickness, cutting requirements, and cutting method also determine:
(one)
,
The materials used to cut the material are not the same as the hard and soft materials. The required alloy saw blade will be different. If the material is hard,
The blade of the saw blade will need to be adjusted. It cannot be hard-stiffened, otherwise the saw blade will be easily damaged; if the material is soft,
The blade head can be hardened to increase the durability of the blade.
(b), cutting material shape
The shape of the material is sometimes regular and sometimes irregular, which requires some adjustments based on the results of the test.
(C), the thickness of the saw blade and the number of teeth The choice of material size, thickness determines the thickness of the alloy saw blade and the number of teeth. When the material is thin, the saw blade must be thin, and the number of teeth must be large to avoid material bending and burrs. When the material is thick, the saw blade must be thick and the number of teeth must be small, so as to avoid yawing, sticking, and chipping of the saw blade. Reasonable blade thickness and number of teeth should be selected based on the thickness of the material being cut and the cutting requirements.
(D), cutting requirements, cutting methods In the cutting industry, many parts are cutting requirements and cutting methods. For example: Some aluminum alloy doors and windows are
45
The requirements of the degree of beveling; some workpiece cutting requirements are burr-free, smooth surface, not broken, and so on. Need to choose the right alloy saw blade according to the actual situation.
(5) Selection of blade size (diameter) The blade size is related to the machine equipment used and the thickness of the sawing workpiece. According to the size of the machine and cutting material to choose the right diameter saw blade.
(6) Selection of the inner hole of the saw blade The inner hole of the saw blade is a relatively simple parameter, which is mainly selected according to the requirements of the equipment, but in order to protect
The stability of the saw blade in the cutting process, diameter is
455
More than a millimeter of the best choice of saw blade
The prefabricated K(1K=1820mm)house is become more popular for quarters and dormitories of any project, because it can be installed with less of time and minimal cost.
It is made of light Steel Structure frame and sandwich panels for the walls and roof. And for the K type house the steel structure frame is right on the wall. The structure is connected by bolts and the walls are fixed with rivets.
When loading the steel structure parts and panels are light and easy to pack and transport.
We can follow the customer layout and their requirements to design the house, The houses are light and can be relocated several times with less wastage.
Prefabricated K House,Simple Modular Homes,Affordable Prefab Cabins,Modular Prefabricated House
Foshan TianPuAn Building Materials Technology Co.,Ltd. , https://www.tpa-prefabhouse.com