Generally, the curtain rod installation is at the end of the whole home decoration. The curtain is the isolation between the family space and the outside world, and is a necessity in the home decoration. However, before installing the curtain, the installation of the curtain rod is particularly important. The following decoration home decoration network small series for the curtain rod installation method and curtain rod installation precautions for everyone to make a comprehensive introduction.
1. Marking: Under normal circumstances, the bearing under the curtain is used as the marking standard, and the positioning line and the hole position line of the bearing are drawn.
    2, punching: the general drilling depth is controlled between 3.5cm and 5cm, to avoid running or skewing. Note: Keep away from wires and water pipes when punching. After punching holes, press the plastic expansion tube into the hole.
3, the installation rod: the support needs to be stable, can be fastened with steel wire and other things, then put the lifting ring into the rod, divided into two, each end has a lifting ring, the rod is pressed into the opening support, adjusted to two The end of the decorative head is the same distance from the wall.
    4. Hanging curtains: Hang one end of the curtains with a good hook into the hole of the ring. After hanging the curtains, try to open and close the curtains to check whether the sliding is flexible.
     1. Level: At present, the height of the roof of some houses is not consistent, and there may be a case of tilting 10cm. Therefore, it is best to measure with a horizontal ruler and a horizontal pipe when installing the curtain rod.
2, the height of the roof: pay attention to the height of the top of the house and the window, to avoid affecting the beauty of the exposed curtain rod. Generally, when installing on a wall, the poles should be about 6cm to 12cm from the roof and ceiling. When installed on the roof and ceiling, the Roman rod should be about 6cm to 10cm away from the wall.
     3. There is room for it: in order to completely cover the window after the curtain fabric is installed, the curtain rod must be installed at a length not less than 6cm longer than the window frame for reservation.
    The above is the introduction of the decoration home decoration network Xiaobian for the curtain rod installation method and installation precautions , I hope to help you. The installation of curtain rods requires attention to the length and distance. The correct installation or not is directly related to the aesthetics of the curtains, so the installer needs to be very careful! For more information, please log in to the decoration home. Net, enter the home encyclopedia to inquire!
Niobium is a rare, soft, malleable, ductile, gray-white metal, it has high melting point,melting point: 2468 °C, Boiling point: 4742°C, it is an associated metal of Tantalum, characterized in high strength, high conductivity, high temperature oxidation resistance, long service life, resistance to corrosion resistance to corrosion by liquid base metals, section with low neutron capture, etc,. Alloying niobium with 1% Zirconium increases the strength of niobium and decreases slightly its elongation. The increased strength is very advantageous especially at temperatures above 600 °C. The niobium products are widely used for steel, ceramics, electronics, nuclear energy industries and superconductor technology. Our niobium products include Niobium Plate, noibium bar, Niobium Wire and so on.
Niobium
Niobium Bar,Niobium Parts,Niobium Target,Niobium Wire
Baoji Shengyuan Metal Material Co., Ltd. , https://www.baojisymetal.com