Water-in-sand coating is a new kind of architectural paint, which is different from what we usually see. It is essentially different. Waterborne sand coating I believe we all do not understand enough, then what is the water-borne sand coating ? Here follows Xiaobian together to see the introduction of water-borne sand coating .
What is water-borne sand coating
Water-in-sand coating is a popular exterior wall imitation stone coating product that has just emerged two years ago. The product is widely used in various high-end projects, and the decorative effect greatly enhances the quality of the project. It can be compared with real stone. Water-in-water sand coating is a combination product of water-in-water paint and real stone paint. It is mainly used to imitate granite products of litchi surface. The water-in-water sand coating brings together the advantages of water-in-water paint and real stone paint. Compared with water-in-water coating, water-in-water sand coating has better coating film strength and better weather resistance; water-in-water sand coating has higher emulsion content than real stone paint, and its pattern is more rich and full of simulation. The effect of stone is better and more realistic.
The advantages of water-borne sand coating
Water-sanding sand coating is a new formula technology product first introduced by Yu Yu Shi in China. The product is mainly used to imitate the granite stone of litchi surface. The main advantages are:
A. The pattern layer and the modeling layer are molded in one shot and the construction is simple;
B. Patterns are more layered and three-dimensional, higher in simulation, and more like stone;
C. The coating has a certain thickness, crack resistance is better;
D. Compared with water-in-water, the impact resistance of water-in-sand coating is more prominent;
E. Combines the advantages of both water-in-water and real-stone paints with high simulation accuracy and good weather resistance.
What is the difference between water-in-water and sand-in-water
Water-in-water and sand-in-water are the same as the colorful paints.
The two products have different surface effects.
Water-in-water is an imitation glossy granite stone, and water-in-sand is a granite-like granite stone.
In terms of the degree of simulation, both of the imitation stone effects are good.
However, in terms of crack resistance, impact resistance and service life, it is definitely better than water-in-water quality.
The above is the difference between the water-borne sand coating that Xiaobian brings to everyone and the difference between water-in-water and sand-in-water. After reading it, is there more understanding of water-in-water sand coating ? We can take a look and hope. Can help everyone, if you want to know other relevant information, please continue to pay attention to this site, more exciting so stay tuned!
Water Reducing Agent is a kind of Concrete Admixture which can reduce the water consumption of mixing under the condition that the slump of the concrete is kept basically unchanged. Most of them belong to anionic surfactants, such as lignin sulfonate and naphthalene sulfonate formaldehyde polymer. After adding the concrete mixture, it has a dispersing effect on the cement particles, which can improve its workability, reduce the unit water consumption, and improve the fluidity of the concrete mixture; or reduce the unit cement dosage and save cement.
Water Reducing Admixture,Magnesium Lignosulphonate Water Reducer,Water Reducer Calcium Lignosulfonate,Magnesium Lignosulfonate Water Reducer
Shenyang East Chemical Science-Tech Co., Ltd. , https://www.eastchemy.com