With the arrival of autumn, the temperature gradually cools, and the air gradually dries up. Many people have begun to strengthen the skin's moisture. In fact, in addition to the skin needs maintenance, our home needs maintenance, such as the maintenance of the wall. The gradual increase of indoor and outdoor temperature difference and dry weather in the autumn may cause cracks and kicks in the walls! So how do you do when the fall meets the wall cracking ? Let's take a look at the maintenance of the wall in autumn and the cracking of the wall !
1, small area cracking putty
Too dry weather not only makes people feel uncomfortable, but also the wall feels uncomfortable. Dry weather may cause the wall putty to shrink, causing wall cracks. In this case, it is necessary to clean the cracks, remove the irregular, floating wall fragments, put the putty on the cracks, and then dry the wall paint. If the crack is large, fillers such as cement must be filled.
2, the wall from the drum scraping
Drums from the wall are also problems that often occur on the walls. This is often caused by impure paint or water vapour infiltration. The wall will have blisters that will fall off when touched. This requires scraping the blistering portion together with a wall covering about 1 cm in size, smoothing the edges of the scraping portion, adding a putty, and repainting.
3, mold must be sterilized
In the wet and rainy summer, some walls may not have weathered the summer's humidity, moldy appearance occurs, and high temperature and high humidity are not suitable for treating moldy walls. Autumn is a good time! Treat moldy walls to scrape moldy parts, clean the walls, dry them, dry them, apply putty, and use lime to remove moisture before painting the walls.
4, the wall clean and dry
The walls of the home must be cleaned from time to time. It is found that the walls must be erased in time. When cleaning, be sure to keep the walls dry and prevent mold. For a water resistant wall, use a cloth to scrub, and dry it with a dry towel after washing. For water-resistant walls, use an eraser or wipe with a towel and wring some of the liquid. Near the corner of the kitchen or bathroom wall, you can put some dry tea or quicklime to absorb moisture and prevent mildew.
5, pay attention to the temperature difference
Autumn temperatures began to fall, but the light was still as strong. When the room is open air-conditioning, pay attention to the temperature difference with the outside, try to maintain the gap within 10 °C, excessive temperature difference will make the wall inside and outside the layer of hot and cold uneven, the wall prone to various problems. At the same time, avoiding direct sunlight on the wall of the room, it is easy to affect the wall paint.
6, ventilation time
The weather in the autumn gradually dries up, and the water will dissipate faster. The daily ventilation time is preferably in the morning or the evening. During this time, the temperature is low and the moisture in the air is also sufficient. If the air is ventilated during the day, it will easily take away the indoor moisture and cause the wall to dry and crack.
With regard to how to do the cracking of the autumn wall , Xiao Bian introduced it to everyone and hoped to help everyone! The biggest change in autumn is temperature and air humidity. We need to keep the walls cool and dry while controlling the temperature difference! For more information, please follow this site!
Wall learning wall construction
Aluminum Grooved Tube is a kind of aluminum round tube which has inner threaded shape.The inner shape can increase the heat flow area thus the heat exchange rate can be increased.Aluminum Grooved Tube is widely used in air conditioning condenser,automobile radiators.Trumony provides high precision extruded round tube.The thinnest wall thickness of the Aluminum Grooved Tube is 3mm.
Aluminum Grooved Tube
Aluminium Square Pipe,Threaded Aluminum Pipe,Threaded Aluminum Tube,Aluminum Inner Grooved Tube
Trumony Aluminum Limited , https://www.trumonyalu.com