Our common medium frequency diathermy furnace equipment is roughly divided into two parts: steel shell with yoke hydraulic tilting furnace and aluminum shell with reducer tilting furnace. Luoyang Kono induction heating power supply takes you through the characteristics of these two devices to discuss the microwave oven equipment.
First, the characteristics of steel shell medium frequency diathermy furnace:
1) Long life: normal service life is more than 10 years;
2) Good stability: Due to the use of the magnetizer, the magnetizer has two functions:
3) The top wire and the induction coil of the magnetizer are firmly fixed, so that the coil of the medium frequency diathermy furnace and the magnetizer form a stable layout.
4) a magnetic barrier can be formed in the vicinity of the coil;
5) Energy saving: the medium frequency diathermy furnace with the magnetizer saves 6%-8% compared with the aluminum shell furnace;
6) Casting fixed point: hydraulic tilting equipment can well grasp the casting viewpoint and speed;
7) The safety function is good (due to the presence of the leak alarm device and the refractory rubber layer), and its outstanding characteristics make the medium frequency diathermy furnace select the steel shell layout in the tonnage greater than 2T.
Second, the characteristics of the aluminum shell medium frequency diathermy furnace:
Aluminum shell furnace is a simple layout method, the service life is usually about 5-8 years, there is no magnetizer, lining out structure, refractory clay layer, its safety function is poor, usually suitable for medium frequency diathermy furnace with capacity below 2T. A set of 5T medium frequency diathermy furnace, when the furnace is full of molten iron, the whole component of the equipment reaches 8-10T. If the aluminum shell layout is selected, when the reducer rotates the furnace body to 95 degrees, the whole furnace body will lean forward, and the safety function is compared. difference. The aluminum shell type medium frequency diathermy furnace is suitable for users who change production in a short time, small tonnage equipment.
This article is taken from: Luoyang Kono Industry (http://) Original link: http://
FeMn Electrode Paste Cylinders
Femn Electrode Paste Cylinders,Self-Baking Electrode Paste Cylinders For Femn,Electrode Paste Cylinders For Femn,Femn Electrode Paste Cylinder
Pingluo Zhongxing Carbon Co.,Ltd , http://www.ztecarbon.com