LED high pole lights are a type of lighting used in roads, roads and other places. Beautiful in appearance and highly decorative. Mingtai Technology's LED lighting driver power supply can be used directly in parallel to meet the ultra-high power requirements. For example, a 300W power supply can be implemented in parallel with three 100W power supplies. High-power LED light source, recommended source split drive, such as 200W light source, it is recommended to use 2 sets of 100W power supply and light source, respectively, drive, as shown below. This can not only achieve high power, but also facilitate the equalization of the currents of the LED light source, improve reliability and reduce light decay. 1000W high rod sodium lamp (or metal halide lamp), 300W-400W LED lamp alternative solution 1: 3W 120W LED lamp for 120W light source adopts Jingke 4X10W (36 string) X3 and integrated LED light source combination 120W power supply adopts TESEMI 120W Electrolytic capacitor power supply scheme 2: Adopt Hong Kong ** manufacturer 300W high pole light scheme, combine 3 100W light source to form 100W light source adopt 42 string X2 and integrate LED light source combination 100W power supply adopts TESEMI 100W electroless capacitor power supply scheme 3: Adopt Zheergy Optoelectronics 2 180W lamps combined 180W light source 42-string directional LED light source combination 180W power supply TESEMI 180W electroless capacitor power supply scheme 4: 300W light source 300W light source 42 string X6 and LED light source combination 300W power supply adopts TESEMI 300W Electrolytic capacitor power supply or 2 TESEMI 150W electroless capacitor power supply in parallel use LED high pole light scheme main event 1. Because more light source combination is adopted, the structure design of the luminaire is the key point. The structural design wind resistance must be considered, the structural design is waterproof. , moisture-proof, good heat dissipation. 2, it is best to consider the AC three-phase balanced access source when installing:
There are three types of PTFE Tube
(1)Paste Extruded Tube
The tube is made by paste extruded with disperse rsin.
(2)Plug Extruded Tube
The tube is made by plug extruded with suspension rsin.
(3)Molded Tube
The tube is made by molded method.
Specifications of PTFE tube
OD(mm) Wall Thickness(mm) Length(mm)
Paste Extruded Tube 0.5~25 0.1~2.5 According to customer's request
Plug Extruded Tube 25~250 1.5~8 According to customer's request
Molded Tube 25~2000 5~500 100~300
And special specifications can be customized.
If you have any interest, please contact us. We will response to you as soon as possible.
Teflon PTFE Tubing,Heat Shrink PTFE Tubing,Non-Aging Virgin PTFE Tubing,Smooth Bore Teflon Tubing
ZHENJIANG CHUNHUAN SEALING MATERIALS CO.,LTD(GROUP) , http://www.chsealing.com